Accurate Basement Repair

Antimicrobial Treatment is medical care that uses medicines to stop or slow the growth of harmful microbes like bacteria, viruses, or fungi. It involves choosing the right drug, timing, and duration to treat infections and prevent spread or complications.

Attic Insulation is the process of adding or upgrading material in your attic to keep heat in during winter and out in summer, usually involving installing insulation batts or blown-in insulation and sealing gaps for energy efficiency.

Basement bulkhead waterproofing protects the entrance to your basement from water leaks by sealing and waterproofing the bulkhead door and surrounding walls, applying proper drainage, sealants, and, if needed, drainage channels to keep moisture out.

A Basement Drainage System is a setup that redirects water away from a home's foundation to prevent leaks and flooding. It usually includes drains placed around the foundation, a gravel bed, a sump pit, pipes, and a pump to move water out and away from the house.

Basement Drainage Systems help prevent water from seeping into your basement by guiding it away from the foundation. It involves installing drains, a waterproof barrier, and sometimes a sump pump to remove collected water and keep floors dry.

Basement Drying Services helps remove water and moisture from basements after flooding or leaks, then dries, dehumidifies, and sanitizes the area to prevent mold, repairs any small damage, and restores a safe, dry space.

Basement Excavation is the process of digging out a section beneath a building to create usable space. It involves site prep, trenching, soil removal, shoring for safety, drainage, and preparing the new floor, walls, and utilities for finishing.

Basement Flood Cleanup is a service that removes standing water, dries out the area, and cleans up mud, soggy insulation, and debris after a flood. Technicians assess damage, use pumps and dehumidifiers, and sanitize to prevent mold.

Basement Flood Protection is a service that helps keep basements dry by assessing flood risk, installing barriers and sump pumps, sealing walls and floors, and providing maintenance tips to prevent water intrusion during heavy rain or rising groundwater.

Basement Floor Crack Repair is a service that fixes cracks in concrete basement floors, sealing gaps, stopping leakage, and sometimes smoothing and sealing the surface to prevent moisture and future cracks.

Basement Floor Leveling is the process of flattening an uneven basement floor so it’s smooth and stable. It involves identifying high and low spots, filling gaps, and grinding or patching until the surface is level for flooring and safe use.

Basement Floor Waterproofing is a service that protects your basement floor from moisture by sealing cracks, applying waterproof coatings, and sometimes installing drainage or sump systems to prevent leaks and dampness inside the space.

Basement Foundation Repair is fixing cracks, leaks, and structural issues in a home’s basement foundation to prevent settling, water intrusion, and damage, using methods like sealing, underpinning, or installing supports and drainage systems.

Basement Health is a service that checks and fixes moisture, mold, drainage, and structural issues in basements to keep them dry, safe, and healthy for living or storage.

Basement Inspection is a service that checks the basement for moisture, leaks, cracks, mold, and structural issues, using visual checks and basic tools to assess safety, identify problems, and recommend fixes for protection and peace of mind.

Basement insulation is adding material to your basement walls or ceiling to slow heat loss, keep the space warmer, and reduce energy bills. It involves installing batts, spray foam, or board insulation, along with vapor barriers and proper sealing.

Basement Leak Repair fixes water leaks in basement walls or floors, stops ongoing moisture, and dries the space. It involves identifying the leak, sealing cracks, repairing damaged foundations or gutters, and sometimes installing drainage or sump systems to prevent future leaks.

Basement lowering is a construction service that reduces the height of a basement to create more usable space. It involves excavating under the building, installing proper support, waterproofing, and finishing the new lower area for storage, living, or utilities.

Basement Moisture Control helps prevent dampness and water in basements by diagnosing moisture sources, sealing leaks, improving drainage, and installing ventilation or dehumidification to keep spaces dry and protect the home and belongings.

Basement Sealing is a service that stops water and moisture from entering your basement by applying waterproof barriers, fixing cracks, and blocking drafts to keep the space dry, mold-free, and energy-efficient.

A basement sump pump is a device installed in a basement that helps prevent flooding by removing water that collects in a sump pit, pumping it away from the foundation to keep floors dry and protect walls and belongings.

Basement Wall Crack Repair is fixing cracks in basement walls to prevent water leaks and improve stability. It involves inspecting the cracks, sealing or injecting epoxy or polyurethane, and sometimes reinforcing with injections or wall stabilization for long-term durability.

Basement Wall Waterproofing protects basement walls from moisture by sealing cracks, applying waterproof coatings, and sometimes adding drainage or vapor barriers to keep water out and keep the space dry and safe.

Basement Walls is a service that builds or repairs the foundation walls of a basement, ensuring they are strong, water-tight, and properly insulated to support the structure and keep the space dry.

Basement Water Damage Repair is fixing water-related damage in a basement, including drying out wet areas, removing standing water, repairing floors and walls, fixing leaks, and restoring safety and usability after flooding or seepage.

Basement Water Drainage is a service that prevents and removes water from basements. It involves waterproofing walls, installing drainage pipes and sump pumps, directing away from the home, and sealing cracks to keep your basement dry and prevent mold.

Basement Water Removal is a service that quickly removes excess water from a flooded basement, dries out walls and floors, handles cleanup, and prevents mold, often using pumps, dehumidifiers, and professional drying equipment.

Basement waterproofing is a service that drys out and protects the basement from moisture and leaks by sealing walls, sealing cracks, installing drains, sump pumps, and proper ventilation to keep the space dry and mold-free.

Basement Waterproofing Systems is a service that prevents water from seeping into your basement. It involves sealing walls, installing drainage and sump pumps, applying vapor barriers, and sometimes repairing cracks to keep basements dry and safe.

Basements Basement Waterproofing is a service that stops water from seeping into your basement by sealing walls, floors, and joints, installing drains and pumps, and applying waterproof coatings to keep the space dry and protected from moisture damage.

A Battery Backup Sump Pump is a pump powered by a rechargeable battery that kicks in when the main power or backup is out, moving water from a sump pit to prevent basement flooding during outages and high rainfall.

Block Foundation Repair is a service that fixes cracked or sinking foundations using supports and methods like piers or underpinning to stabilize a building, prevent further movement, and protect against basement leaks and structural damage.

Block Wall Core Fill is a construction service that fills the hollow cores of concrete or masonry blocks with material (like grout) to strengthen walls, improve stability, reduce movement, and increase load-bearing capacity during repairs or new builds.

Block Wall Rebuild is a service that repairs or rebuilds damaged brick or concrete walls, replacing missing blocks, refacing, and ensuring stability and proper alignment for a strong, secure boundary or structure.

The Bowing Foundation Wall service addresses cracks or movement in a building’s foundation wall, stabilizing and repairing it with appropriate supports, reinforcements, and moisture management to prevent further damage and ensure safety.

Bowing Wall Repair is a service to fix walls that bulge or crack due to pressure from soil, water, or foundation shifts. It involves assessing the cause, reinforcing or replacing damaged framing, and sealing the wall to restore straightness and stability.

Carbon Fiber Corner Wrap is a vinyl wrap applied to the edges or corners of a surface to simulate carbon fiber, protecting and changing the look. It involves measuring, cleaning, cutting, and carefully applying the thin material for a seamless finish.

Carbon Fiber Crack Stitching is a repair method that uses stitched carbon fiber patches to reinforce cracked or damaged composite parts, transferring loads, restoring strength, and extending life by threading and bonding fibers across the crack.

Carbon Fiber Foundation Repair is a method that reinforces and stabilizes cracked or bowing foundations using strong carbon fiber strips or sheets bonded to the concrete, creating a lightweight, durable support system without heavy digging.

Catch Basin Installation is installing drainage basins and pipes to collect and redirect stormwater away from properties, preventing flooding. It involves site assessment, digging, placing basins, connecting pipes, and testing the system for proper flow.

Channel Drain is a simple service that helps you fix clogged sink or drain pipes by clearing blockages, removing buildup, and restoring water flow through safe, step‑by‑step guidance and basic tools, with tips to prevent future clogs.

Commercial Concrete Leveling is the process of leveling sunken or uneven concrete surfaces such as floors, slabs, or sidewalks in commercial spaces. It uses injections or mechanical methods to lift and stabilize the concrete, creating a smooth, safe, and durable surface.

Commercial Foundation Repair is a service that fixes sinking or cracked building foundations to stabilize structures, prevent damage, and protect against future issues by assessing soil, concrete, and drainage, then using appropriate repairs and reinforcement.

Concrete Crack Repair is a service that fixes cracks in concrete surfaces, such as foundations or sidewalks. It involves cleaning the crack, filling it with sealing material, and sometimes reinforcing or sealing to prevent moisture and further damage.

Concrete Flatwork is the laying and finishing of flat concrete surfaces like driveways, sidewalks, and slabs. It involves site prep, form installation, pouring, leveling, smoothing, and curing to create durable, level concrete surfaces.

Concrete Footing Repair is a service that fixes cracked or sinking concrete foundations at the base of structures. It involves inspecting damage, stabilizing the footing, filling cracks, and sometimes replacing or reinforcing the concrete to restore support and prevent further settlement.

Concrete Leveling is a service that fixes sunken or uneven concrete surfaces by lifting them back to level using techniques like polyurethane foam or grout injections, filling gaps, and resealing to restore a smooth, stable, and safe walkway, patio, or driveway.

Concrete Lifting is a process that stabilizes and raises sunken concrete slabs by injecting a measurable material beneath them, then leveling the surface. It restores evenness, reduces tripping hazards, and improves durability without full replacement.

Concrete Raising is a service that lifts and stabilizes sunken or uneven concrete surfaces, like slabs or sidewalks. Technicians assess the area, place supports or jacks, lift the slab to level, and re-secure or fill joints to restore a smooth, safe surface.

Concrete Restoration is the process of repairing damaged concrete surfaces to restore strength, appearance, and safety. It involves cleaning, filling cracks or holes, patching with matching material, and sealing to prevent future damage.

Concrete Slab Leveling fixes sunken or uneven concrete slabs by lifting and stabilizing them with injections or mechanical jacks, then sealing to prevent future settling. It restores a flat, durable surface suitable for foot traffic or vehicles.

Concrete Slab Repair is fixing damaged concrete slabs to restore a smooth, level surface. It involves assessing cracks, holes, or unevenness, preparing the area, filling or resurfacing, and finishing with proper curing for durability.

Concrete Underpinning is a service that strengthens a building’s foundation by installing new concrete support below ground to replace weak soil, improve stability, and lift settling structures, typically using piers or piles and specialized excavation techniques.

Cracked Walls is a repair service that assesses, patches, and restores damaged walls, fixing cracks, water damage, and bulges. It involves inspection, preparation, filler or patching, sanding, priming, and repainting to restore a smooth, durable surface.

Crawl Space Air Sealing is a home service that blocks air leaks in crawl spaces to keep heat in and dampness out. Technicians inspect the area, seal gaps and cracks, and may install insulation or barriers to improve comfort and energy efficiency.

Crawl Space Conditioning is a service that improves the air quality and moisture control under a home by sealing, insulating, and ventilating the crawl space to prevent mold, odors, pests, and structural damage while enhancing energy efficiency.

A Crawl Space Dehumidifier is a device installed in damp crawl spaces to remove moisture, reduce humidity, prevent mold, and protect structure. It runs automatically, collects water in a tray or drain, and helps keep the area dry and safe.

Crawl Space Dehumidifier Installation installs a dedicated dehumidifier under your home to reduce dampness, prevent mold, and improve air quality by removing moisture from the crawl space and connecting it to power and drainage.

Crawl Space Dig Out is a service to clear and restore a damp, blocked crawl space by removing debris, dirt, and moisture, fixing drainage, insulating, and drying the area to prevent mold and improve air quality.

Crawl Space Door Installation is the process of fitting a sturdy door to the entrance of a crawl space, often to improve access, insulation, moisture control, and overall energy efficiency by sealing and securing that area.

Crawl Space Drainage is a service that removes excess water from beneath your home. It involves installing drains, sump pumps, and vapor barriers to keep the crawl space dry, reduce moisture, and prevent mold and structural damage.

Crawl Space Encapsulation is sealing and insulating a crawl space to keep moisture out, improve air quality, and prevent mold. It typically involves sealing vents, installing a vapor barrier, sealing gaps, and adding insulation and/or a dehumidification system.

Crawl Space Energy Efficiency is a service that improves comfort and lowers energy bills by sealing and insulating crawl spaces, repairing moisture issues, and installing air barriers and vents to reduce heat loss and drafts in homes.

Crawl Space Foundation Repair is fixing issues under a house’s crawl space, such as moisture, bowed walls, foundation sinking, or structural gaps, using waterproofing, supports, and sealing to stabilize and protect the home.

Crawl Space Insulation involves sealing and insulating the area under a home to stop drafts and heat loss. It typically includes sealing gaps, installing breathable or moisture-resistant insulation, vapor barriers, and sometimes encapsulation to improve energy efficiency and comfort.

Crawl Space Moisture is a service that finds, measures, and reduces dampness under your home. It involves moisture testing, vapor barriers, insulation checks, drainage fixes, and climate control to prevent mold, rot, and structural damage.

Crawl Space Moisture Barrier is a protective lining installed on the ground and walls of a crawl space to block moisture, mold, and odors. It involves cleaning, sealing gaps, laying waterproof material, and securing edges to create a dry, healthy space.

Crawl Space Moisture Control helps prevent dampness and mold by measuring humidity, fixing leaks, improving ventilation, and installing vapor barriers or drainage to keep the space dry and healthy.

Crawl Space Mold Removal is a service that cleans and removes mold from under the home, dries the area, treats surfaces to prevent recurrence, and restores air quality to protect the home and its occupants.

Crawl Space Repair is fixing moisture, mold, and structural problems under a house. It involves inspecting, sealing vents, installing vapor barriers, repairing framing, bug barriers, and sometimes insulation and drainage to keep the area dry and sturdy.

Crawl Space Sealing is sealing gaps and vents under a home to block drafts, moisture, pests, and odors. It involves inspecting, sealing cracks, insulating, and sometimes installing vapor barriers to create a dry, energy-efficient space.

Crawl Space Structural Repair fixes foundation problems under a home, like sagging or bowing beams, uneven floors, and cracked support posts. It involves assessing damage, replacing or reinforcing supports, and sometimes moisture control to prevent future issues.

Crawl Space Sump Pump is a system installed in a crawl space to collect and remove excess groundwater, preventing flooding and dampness. It usually includes a sump basin, a pump, and discharge lines, plus electrical and drainage setup for continuous operation.

Crawl Space Vapor Barrier is a material installed on the crawl space floor or walls to block moisture from seeping into the home, reduce humidity, and prevent mold; it typically involves layering a durable plastic sheet and sealing seams and edges.

Crawl Space Vapor Barrier Installation is a service that seals the crawl space floor with a plastic barrier to reduce moisture, prevent mold, and improve air quality. It typically involves measuring, cleaning, laying sheets, sealing seams, and anchoring edges.

Crawl Space Vent Covers are protective panels that seal and cover crawl space vents to keep out pests, moisture, and debris while allowing airflow when needed, often installed with simple fitting or sealing methods.

Crawl Space Water Damage is a service that detects, stops, and repairs water intrusion under a home, drying the area, preventing mold, and restoring insulation, flooring, and structure to prevent further moisture problems.

Crawl Space Water Removal is a service that quickly removes unwanted water from under a building, drying the area, preventing mold, and restoring usable space after flooding or spills.

Crawl Space Waterproofing is the process of sealing and damp-proofing your crawl space to prevent moisture from seeping in, stopping mold, odors, and wood damage. It involves sealing vents, improving drainage, vapor barriers, and sometimes sump pumps.

Crawlspace Waterproofing is a service that keeps the area under your home dry by fixing leaks, sealing walls and floors, installing vapor barriers, and sometimes adding drainage or dehumidification to prevent moisture, mold, and structural damage.

Curtain Drain Installation is adding a shallow trench and perforated pipe along a foundation to collect and redirect underground water away from your home, reducing moisture and basement seepage; it involves trenching, piping, and proper gravel fill for drainage.

Deep Foam Injection is a treatment that uses a foaming chemical mix injected into tissue or cavities to lift, fill, or provide padding. It involves precise delivery, controlled expansion, and curing to shape or reinforce the area with lightweight foam.

Dehumidification Services remove excess moisture from indoor air to prevent mold, dampness, and musty smells. The service involves testing humidity, selecting appropriate equipment (dehumidifiers), and running them until safe humidity levels are restored.

Dehumidifier Installation is the service of placing and connecting a dehumidifier in your home to remove excess moisture from the air, improve comfort, and protect walls and furniture. It includes selecting the right unit and ensuring proper fitting and operation.

Downspout Drainage helps redirect rainwater from roof gutters away from your home’s foundation. It involves collecting water through downspouts, guiding it through pipes or splash blocks, and preventing erosion or basement flooding.

Downspout Extension Installation installs pipes or extensions to redirect roof drainage away from your foundation, improving water management. It involves assessing gutters, selecting the right extension, attaching it securely, and testing flow.

Drain Tile Installation is the process of laying perforated pipes surrounded by crushed stone or gravel to collect groundwater and direct it away from foundations, basements, or damp areas, reducing moisture and preventing flooding.

Drain Tile Replacement is fixing or replacing the buried pipes or tiles around your home's foundation that drain water away from the basement to prevent leaks and flooding, typically involving excavation, removal of old tiles, and installing new drainage tiles with proper grading.

Drain Tile Testing & Repair identifies and fixes damaged or blocked drainage tiles around a foundation. It involves inspecting for leaks, testing drainage efficiency, locating failed tiles, and repairing or replacing sections to prevent water intrusion and protect the basement.

Drainage Repairing fixes broken or blocked pipes and drains to prevent leaks, backups, and water damage. It involves locating the problem, clearing clogs, repairing or replacing pipes, and ensuring proper drainage and sealing to restore a safe, functional system.

Driveway Concrete Repair is fixing cracks, chips, and worn areas in concrete driveways to restore a smooth, durable surface. It involves cleaning, filling, patching, and sealing to extend life and improve appearance.

Driveway Leveling is the process of smoothing and raising an uneven driveway surface. It involves assessing slope, filling low spots, compacting gravel or asphalt, and sometimes adding fresh material to create a flat, drainable surface for safe driving and proper drainage.

Drywell Installation is the process of placing a perforated underground container to collect and disperse rainwater or runoff into the soil, preventing flooding. It involves site assessment, trenching, installing the drywell, connecting pipes, and sealing and testing for proper drainage.

Egress Window Installation creates an opening and installs a compliant window in a basement or below-grade space, providing a safe, code‑approved exit. It involves assessing size, cutting the wall, installing the well and ladder or stairs, and finishing framing, waterproofing, and trim.

Emergency Water Removal is a rapid service that quickly extracts excess water from flooded homes or spaces using pumps and specialized dry-out equipment, then dries and cleans the area to prevent damage and mold.

Epoxy Crack Injection is a repair process that fills and seals cracks in concrete with epoxy resin, restoring strength and preventing movement. It involves cleaning the crack, sealing the surface, mixing epoxy, and injecting it under pressure to bond the sides together.

Exterior Basement Waterproofing is a service that protects your basement from water by sealing and draining the outside walls. It involves inspecting for leaks, applying waterproof coatings, installing drainage systems, and sealing cracks to keep moisture out.

Exterior Drain is a drainage service that locates and installs outdoor pipes or channels to divert rainwater away from a foundation, yard, or basement. It involves digging, laying pipes, and ensuring proper slope and outlet drainage.

Exterior Drainage Systems protect a building by directing rainwater away from the foundation using drains, grading, and sometimes membranes or gravel. It involves planning, installing, and maintaining gutters, downspouts, trenches, and drainage pipes to prevent water damage.

An exterior French drain is a trench filled with gravel and a perforated pipe that redirects groundwater away from a foundation or area, preventing water buildup. It involves digging the trench, laying the pipe, covering with gravel, and proper drainage outlet.

Fiberglass Insulation is a lightweight material made of glass fibers that fills walls, attics, and floors to slow heat transfer. It involves installing batts or loose-fill panels in spaces to improve energy efficiency and soundproofing.

Flood Damage Restoration is the process of cleaning up and fixing your home after a flood. It includes water removal, drying, sanitizing, repairing, and restoring damaged walls, floors, and belongings to prevent mold and further harm.

Flooded Basement Repair is a service that fixes water damage in basements, stops leaks, removes water, dries and dehumidifies the space, cleans and sanitizes, repairs structural and electrical issues, and restores floors, walls, and belongings.

Foam Board Insulation is a lightweight, rigid boards made from foam that you install in walls, roofs, or foundations to reduce heat loss. It involves measuring, cutting, sealing edges, and fastening the boards with adhesive or fasteners, then sealing joints for a tight fit.

Foam concrete lifting is a light, pumped concrete mix used to raise sunken floors or slabs. It involves drilling small injection holes, injecting foam concrete under the structure to lift it back to level, then patching holes and finishing the surface.

Foundation Crack Repair is a service that fixes cracks in a building’s foundation to restore stability and prevent further damage. It typically involves inspecting the cracks, choosing a repair method (like epoxy or polyurethane injections or underpinning), and sealing the area.

Foundation Drainage is a service that installs a drainage system around a building’s foundation to direct water away from it, preventing leaks and cracks. It involves trenching, piping, and grading to keep soil dry and the structure stable.

Foundation Drainage Installation involves adding underground drains and grading around a building to move water away from the foundation, preventing leaks and damage. It includes trenching, installing perforated pipes, a gravel bed, and proper outlet placement.

Foundation Inspection is a service that checks a building’s foundation for cracks, shifts, moisture, and overall stability. It involves visual inspection, measurements, minor tests, and a report with findings and any recommended repairs.

Foundation Leak Repair is a service that fixes water leaks in and around your building’s foundation, seals cracks, waterproofs walls and floors, restores drainage, and prevents moisture damage to protect the structure’s stability and interior spaces.

Foundation Leveling is a service that stabilizes a sinking or settling building foundation by raising and leveling it, often using concrete piers, jacks, or shallow underpinning, to prevent further movement and protect the structure.

Foundation Pier Installation is a service that installs deep concrete or steel piers to support buildings or decks. It involves assessing soil, drilling or driving piers, pouring concrete footings, and ensuring stability and proper load transfer for a solid foundation.

Foundation Piering is a repair method using steel or concrete piers placed under a building’s foundation to stabilize settling or sinking. It involves evaluating the problem, installing piers, and lifting and leveling the structure to prevent further movement.

Foundation Raising is a service that strengthens and lifts the building’s base to improve stability, prevent settling, and protect against shifting soil. It involves assessment, selecting a method, and implementing supports beneath the foundation to evenly transfer loads.

Foundation Repair is a service that fixes the main supports of a building to stop cracks, sinking, or shifting. It involves inspecting the foundation, identifying causes, and installing supports or waterproofing to restore stability and prevent future damage.

Foundation Repair Basement Waterproofing is a service that fixes cracks and damage in foundations and walls, then seals and drains to prevent water from seeping in, keeping basements dry and structurally sound.

Foundation Restoration is a service that fixes and stabilizes a building’s foundation to prevent cracks, uneven floors, and water intrusion, using assessments, underpinning or pier repairs, drainage improvements, and structural reinforcement.

Foundation Settling Repair helps stabilize a home when the foundation sinks or shifts, using methods like underpinning or piers to lift and support the structure, prevent cracks, and protect against future settling.

Foundation Stabilization is a service that strengthens and secures a building’s foundation to prevent movement, cracks, and damage. It involves assessing soil and structure, then adding supports, injections, or underpinning to create a solid, durable base.

Foundation Underpinning is a construction process that strengthens and stabilizes a building’s foundation by installing additional support below ground to prevent settles, cracks, or movement, often using piers, pushed piles, or concrete pads.

Foundation Wall Crack Repair is a service that fixes cracks in basement or foundation walls to stop water leaks and prevent further settling. It involves assessing the crack, cleaning, sealing, and sometimes reinforcing with epoxy, polyurethane, or carbon fiber depending on the damage.

Foundation Wall Repair is fixing cracks, bowing, or leaning basement or crawlspace walls to restore strength and prevent water or soil damage. The process may include wall stabilization, crack sealing, and waterproofing with proper permits and skilled labor.

Foundation Water Damage is a service that fixes leaks and moisture affecting building foundations, including detection, water removal, drying, and repairs to prevent cracks, mold, and structural issues.

Foundation Water Management is a service that plans, installs, and maintains water systems for communities or buildings, focusing on safe water supply, proper drainage, leak control, and sustainable water use to protect health and the environment.

Foundation Waterproofing is a service that seals and protects the base of a building from moisture, cracks, and water intrusion. It typically includes inspection, sealing cracks, applying membranes or coatings, and drainage improvements to keep interiors dry.

Foundations is a beginner-friendly program that teaches essential skills, knowledge, and mindset to build a strong base for a project or career, including core concepts, practical practice, and guided steps to progress confidently.

Foundations Crack Injection is a repair service that seals cracks in concrete foundations by injecting epoxy or polyurethane foam to stop water leaks and restore strength, often followed by cleaning and surface finishing.

Free Concrete Leveling Estimate is a no-cost, on-site assessment to check uneven concrete slabs, explain causes, and provide a straightforward quote for leveling with proven methods and timeline, so you know costs before any work starts.

Free Foundation Inspection is a no-cost visit by a specialist to check your building’s foundation, walls, and basement for cracks, moisture, or other problems, explain findings in plain terms, and advise on any needed steps or referrals.

Free Inspection is a no-cost check of your item or property to assess its condition, identify issues, and determine next steps, with no obligation to buy or commit after the review.

Free Quote is a service that gives you a no-cost estimate for a project or job. You describe your needs, and the provider reviews details to share a price, timeline, and scope without charge or obligation.

French Drain Installation is installing a perforated pipe in a trench with gravel to redirect groundwater away from a foundation or low areas, helping prevent water pooling and dampness by guiding water to a drain or safe outlet.

Full Basement is a home cleaning and restoration service that clears, cleans, and sanitizes basements, handles clutter, floors, walls, and often moisture issues, leaving the space organized, dry, and ready for use.

Garage Floor Leveling is a service that smooths and evens a concrete garage floor by addressing cracks, uneven spots, and sloped sections to create a flat, durable surface suitable for vehicles, storage, and work areas.

Glass Block Window is a building service that installs decorative, translucent glass blocks to form a window. It involves measuring, fitting individual glass blocks with mortar or sealant, and finishing with grout or edging to create a light-filled, private wall section.

Grading is the process of evaluating work or tests to assign scores or grades based on set rules, criteria, and rubrics, often checking accuracy, quality, and performance against standards.

Grate Drain Installation is installing a grate-covered channel in floors or yards to collect and drain water away, preventing flooding. It involves planning layout, digging a trench, laying a drain pipe, fitting the grate, and testing for proper flow.

Gutters/Downspouts are the exterior pipes and channels that collect rainwater from your roof and direct it away from the foundation to prevent leaks and water damage; the service includes inspection, cleaning, and repair of the gutters and downspouts.

Helical Pier Installation is a foundation support method that uses screw-like steel piers (helical piles) drilled into the ground to stabilize a structure. The process involves driving or turning the piers to the correct depth, then attaching a bracket and the building to transfer loads safely.

Helical Pier Systems are screw-like foundations drilled into the ground to stabilize and support structures. They involve placing helix-shaped steel piers under a building or structure, then lifting, leveling, and securing it to prevent settling or movement.

Helical Tieback Installation involves placing screw-in anchors into soil to brace walls or foundations, then attaching steel tiebacks to transfer soil pressure and stabilize structures during and after excavation.

I-Beam Wall Stabilization strengthens building walls using sturdy steel I-beams to brace and prevent movement, torsion, or cracking. It involves installing beams along walls, attaching them to studs or foundations, and ensuring improved rigidity and safety.

Interior Basement Waterproofing is a service that seals and drains the inside of a basement to keep water out, usually by repairing walls and floors, installing a drainage system, and applying moisture barriers to prevent dampness and mold.

Interior Drain Tile is a waterproofing system installed inside a basement or crawl space to collect and channel water away from walls. It involves laying perforated pipe and a drainage bed along the interior perimeter, connected to a sump pump or drain to prevent flooding.

A Foundation Drain Tile System is a drainage setup that surrounds a building’s foundation to redirect groundwater away, using perforated pipes, gravel, and a filter. It prevents water intrusion and dampness by guiding moisture to a sump or drainage outlet.

A lightweight home drainage solution that channels water away from foundations and basements using pipes, gravel, and a trench. It involves planning, installing perforated pipes, a gravel bed, and a method to collect and direct moisture safely away from the building.

Interior French Drain is a system installed inside a building to divert groundwater away from damp areas. It involves a trench, perforated pipe, gravel, and a sump or pump to collect and move water to a drain or outdoors, reducing basement moisture.

Interior Slab Leveling is a service that stabilizes and flattens sunken or uneven concrete slabs from inside the building by pumping material under the slab to raise and level it, filling gaps and preventing further settling and damage.

Leaking Basement Fix is a service that identifies and repairs water leaks in basements, stopping seepage and dampness. It involves inspection, sealing cracks, waterproofing walls and floors, improving drainage, and fixing any associated damage to prevent future flooding.

Moisture Barrier Installation is placing a protective layer on floors or walls to block water and dampness, preventing mold and damage. It involves prepping the area, measuring, and securely applying the barrier material according to the surface and climate.

Moisture Damage Repair is fixing areas damaged by water, mold, or humidity. It involves assessing the damage, drying and removing wet materials, treating mold, repairing or replacing affected walls, flooring, and insulation, and ensuring the space is dry and safe.

Mold Prevention helps keep spaces dry and mold-free by reducing moisture, fixing leaks, improving ventilation, cleaning surfaces, and using molds-safe treatments to stop growth and protect health.

Mold Remediation is the process of removing mold from a home or building and fixing moisture problems to prevent it from coming back. It involves inspection, containment, cleaning surfaces, and restoring affected areas safely.

Mudjacking is a method to raise sunken concrete by pumping a slurry mix under it to fill voids and lift the surface back to level, then sealing it. It involves drilling small holes, injecting material, and smoothing the surface.

Parging Foundation Walls is the process of applying a cement-like coating to the exterior of a foundation wall to seal, smooth, and protect it from moisture, weather, and wear, usually including surface prep, masonry patching, and a finishing layer.

Patio Concrete Leveling is a service that fixes a wobbly, sinking, or uneven patio by lifting and leveling the concrete using injections or other methods, then sealing cracks to restore a smooth, safe, and even surface for outdoor spaces.

Patio Leveling is the process of making a wobbly or sunken patio flat and stable. It involves inspecting the slab, removing or adding soil or backing, and using leveling compounds or slabs to ensure the surface drains properly and remains level over time.

Pier Installation is the service of building and anchoring a sturdy pier or dock into the water or shoreline, including site prep, foundation work, decking, railing, and finishing touches to create a safe place to access boats or enjoy the water.

Poly Jacking is a construction process that uses high-pressure polyurethane foam to fill gaps and lift and stabilize structures, such as slabs or foundations, by creating a light, strong, and insulating layer beneath them.

PolyLevel Concrete Lifting is a quick, noninvasive repair that lifts sunken sidewalks, driveways, or slabs using small injections of expanding polyurethane foam to restore level surfaces without heavy demolition.

Polyurethane Foam Injection is a repair method that fills gaps or cracks by injecting expandable foam. It seals, stabilizes, and insulates foundations or structures, expanding to harden and create a moisture- and air-tight barrier from inside the material.

Pool Deck Leveling is the process of evening the surface around a pool to fix slopes, cracks, or settling. It involves inspecting the deck, preparing the area, applying leveling compounds or patches, and finishing with a smooth, even, and safe surface.

Porch Leveling is a service that fixes a sloped, sinking, or uneven porch by assessing the structure, then lifting and supporting it with jacks or footing adjustments to create a stable, level surface for safety and usability.

Possible Bowed Walls is a service that identifies walls that appear curved or bulging, explains why this happens, and outlines steps to fix or stabilize them, often including inspection, measurements, and recommended repairs.

Poured Wall Crack Repair fixes cracks in poured concrete foundation walls using epoxy or polyurethane injections to seal gaps, restore strength, prevent water intrusion, and stabilize the wall, often with surface sealing and patching for a smooth finish.

Poured Wall Foundation Repair is fixing cracks and issues in a home’s concrete basement walls by reinforcing and sealing with structural concrete, epoxy or polyurethane injections, and proper drainage to prevent further damage.

Poured Walls is a construction service that builds strong, solid walls by pouring concrete into molds. It involves forms, concrete mixing, pouring, leveling, curing, and finishing to create durable foundation or basement walls.

Pressure grouting is injecting pressurized grout into soil or rock to fill voids, seal cracks, and improve stability. It involves pumping a cementitious mix through hoses or pipes, monitoring pressure, and distributing it to achieve solid, uniform stabilization.

Property Management is a service that oversees rental properties, handling tasks like finding tenants, collecting rent, maintaining buildings, handling repairs, and ensuring compliance with laws to keep properties profitable and well cared for.

Push Pier Installation is a method to stabilize sinking or damaged foundations by driving steel piers into the soil and attaching them to the foundation, lifting it back to level, and securing it to prevent future movement.

Push Pier Systems are foundation stabilizers installed to support settling or shifting homes. They involve driving steel piers beneath a structure, attaching anchors to the foundation, and lifting or stabilizing the building to restore level, dry, and safe space.

Repair flooring is fixing damaged floors to restore them. It involves assessing wear or damage, removing or patching sections, leveling surfaces, and installing or refinishing material like wood, tile, or laminate so the floor looks and works like new.

Repairing Cracked is a service that fixes damaged or cracked items, like screens or materials, by assessing damage, cleaning, sealing or replacing cracked parts, and restoring strength and appearance so the item works again.

Residential concrete leveling is a service that fixes uneven concrete surfaces like sidewalks, driveways, or slabs by lifting and stabilizing the slab with injections or pressure-balanced material, restoring a smooth, safe, and level surface.

Residential Foundation Repair is fixing cracks, settling, or damage to a home's foundation to stabilize the structure, often with inspections, soil tests, underpinning or pier installations, and repairs to walls, floors, and doors to prevent further problems.

Rim Joist Insulation is adding insulation around the open space at the edge of a basement or crawl space floor to reduce drafts and heat loss, often using foam boards or spray foambed and sealing air leaks for an energy-efficient seal.

Sealed Crawl Space is a service that preps and seals your crawl space to block moisture, pests, and odors. It usually includes moisture barriers, vent sealing, insulation, and cleanup to improve energy efficiency and indoor air quality.

Settling Foundation Repair is fixing foundations that have sunk or shifted over time. It involves assessing soil, structure, and cracks, then using methods like underpinning or slab jacking to stabilize and restore level, safe support for the building.

Sidewalk Leveling is a service that repairs sunken or cracked sidewalks by lifting and leveling concrete to create a flat, safe walkway, often using hydraulic tools or foam injections, with restored grade and improved accessibility and appearance.

Sinking Concrete Repair is a service that fixes foundations or concrete slabs that have settled or cracked. Technicians assess the sunken area, lift or level it, fill gaps, and seal with durable materials to restore stability and prevent further damage.

Slab Foundation Repair is fixing a concrete floor that sits directly on the ground. It involves assessing cracks or sinking, then lifting or reinforcing the slab with techniques like underpinning, epoxy injections, or stabilizing piers to restore level, strength, and stability.

Slab jacking is a repair method that lifts sunken concrete slabs by pumping a cementitious grout beneath them to raise and level the surface, then sealing and finishing for a smooth, stable result.

Slab Settlement Repair fixes sunken or cracking concrete slabs by assessing the cause, lifting or leveling the slab, and filling joints or cracks to restore a flat, durable surface for floors or driveways.

Slab Stabilization is a service that strengthens and stabilizes a concrete floor slab to prevent cracking, settling, or movement. It involves assessment, leveling, and repairing the slab with injection, epoxy, or grout to restore evenness and support.

Soil Stabilization is a service that improves soil strength and durability by adding binders or additives, reducing dust and erosion, and enabling better road, foundation, or construction performance on challenging ground.

Spray Foam Insulation is a process that fills walls and ceilings with a liquid foam that expands into a rigid insulation layer, sealing gaps to reduce heat loss and improve energy efficiency; it involves professional spraying and curing to create a continuous air barrier.

Steps Leveling is a simple service that helps you measure and adjust step-by-step progress in a project or skill, using clear goals, checkpoints, and small, steady tasks to track improvement and stay on track.

Stoop Leveling is a service that helps raise or stabilize a home's porch or entry steps by tightening supports, replacing damaged posts, and leveling the concrete or wood steps to ensure safe, even footing and a solid, stable entrance.

Structural Drying is the process of thoroughly removing moisture from a building’s structure after water damage, using specialized equipment to dry walls, floors, and framing to prevent mold, warping, and further damage, restoring stability and safety.

Structural Foundation Repair is a service that strengthens and stabilizes the building’s foundation when cracks, settlement, or movement occur, using methods like underpinning, pier systems, and soil stabilization to prevent further damage and protect the home’s structure.

Structural Repair is fixing damage to a building’s main supports, like beams and foundations, to restore safety and stability. It involves assessing damage, strengthening or replacing weakened parts, and ensuring the structure meets safety codes and long-term durability.

Structural construction assistance helps plan, supervise, and check building projects to ensure safety and compliance. It involves estimating needs, coordinating trades, reviewing designs, solving on-site issues, and ensuring codes and standards are followed.

Sump Pump Installation is the process of placing and wiring a pump in a basement to remove excess water. It involves selecting a pump, preparing a sump basin, installing piping and a discharge line, connecting power, and testing the system to protect against flooding.

Sump Pump Maintenance is a service that checks and keeps your sump pump working to prevent basement flooding. It includes testing the pump, inspecting the motor, cleaning debris, replacing worn parts, and ensuring proper water flow and power safety.

Sump Pump Repair is fixing or restoring a basement pump that removes groundwater. It involves diagnosing why the pump isn’t working, replacing worn parts, cleaning, testing the system, and ensuring it safely pumps water away from the home.

Sump Pump Replacement is taking out an old or faulty basement pump and installing a new one to remove excess water. It involves disconnecting power and pipes, selecting the right pump, installing it, testing, and ensuring proper drainage and backup options.

A Sump Pump System helps keep basements dry by pumping out groundwater that collects in a sump pit. It includes a grate pit, a submersible pump, a float switch, discharge piping, and a power source, usually with a backup option for power outages.

Sump Pump Systems are setups that remove water from spaces like basements to prevent flooding. They include a pump, a pit, power supply, and piping to drain water away, with switches and sometimes backup battery power for reliability.

Sunken Concrete Repair fixes ground-level concrete that has settled or hollowed by lifting and realigning its surface, filling voids, and sealing joints to restore a smooth, level, durable sidewalk, driveway, or floor.

Surface Water Drainage involves managing rainwater that collects on the surface, directing it away from streets and buildings through channels, drains, and runoff systems to prevent flooding and protect communities and infrastructure.

Temporary Shoring is quick, short-term support installed to hold up structures during construction or repair. It involves engineered props, shores, and frames placed to transfer weight, prevent collapse, and keep the area safe until permanent fixes are completed.

Thorough Inspection is a detailed check of a system or item to ensure every part works, looks for defects, verifies safety and compliance, and documents findings. It involves testing, measuring, and reviewing processes to provide a clear status report.

Tile work replacement is fixing or replacing damaged wall or floor tiles. The service involves removing broken tiles, preparing the surface, cutting new tiles to fit, applying adhesive, setting tiles evenly, grouting, and sealing to finish a clean, durable surface.

Tripping Hazard Repair fixes uneven or slippery surfaces, dangly cords, or loose pavement to prevent slips. A technician inspects, identifies hazards, and repairs or replaces damaged sections, smooths edges, and improves lighting or grip for safety.

Underpinning Basements Basement is a service that strengthens and expands a home's basement by adding support underneath, stabilizing foundations, and sometimes creating more usable space through controlled digging, concrete work, and structural reinforcement.

Uneven Concrete Repair fixes uneven, cracked, or sunken concrete surfaces by leveling, filling gaps, and smoothing with patching compounds or overlays to restore a safe, level, and durable floor or driveway.

Vapor Barrier Crawl Space is a home improvement service that installs a moisture barrier on the floor of a crawl space to prevent dampness from entering the living area, reducing mold risk and improving energy efficiency.

Vapor Barrier Installation is the process of placing a moisture-proof layer in walls, floors, or ceilings to prevent dampness. It involves inspecting areas, selecting the right barrier, sealing seams, and ensuring proper adherence and durability.

Void Filling is a service that fills empty spaces or gaps with material to restore shape, support, or continuity. It involves assessment, preparation, precise application, and finishing to blend with surrounding surfaces for stability and a seamless look.

Wall Anchor Installation is the process of securing items to walls using sturdy anchors. A technician marks, drills, inserts anchors, then mounts brackets or fixtures to hold shelves, TVs, or artwork safely, ensuring strong, stable support.

Wall Rebuilds is a service that guides you through restoring damaged or fallen walls, including planning, framing, materials, and construction steps to restore safety, stability, and appearance in your space.

Wall Reinforcements is a service that strengthens building walls with additional supports, braces, and materials to improve safety and stability, including assessment, design, installation, and inspection to prevent cracks and collapse.

Walls Repairs is a service that fixes damaged walls, cracks, holes, and uneven surfaces in homes or buildings. It involves assessing damage, prepping the area, patching or replacing materials, smoothing, priming, and repainting to restore a clean, solid wall.

Warehouse Floor Leveling is a service that corrects uneven concrete floors to create a flat, smooth surface. Technicians assess, grind or fill low spots, and apply sealers or patches to ensure stability for equipment, shelving, and safe operations.

Water Damage is a service that helps restore homes or offices after water exposure, like floods or leaks. It includes quick assessment, water extraction, drying, dehumidifying, mold prevention, and repairs to prevent further damage and return spaces to normal.

Water Damage Assessment is a service that inspects a property after a leak or flood to determine what areas are wet, how severe the damage is, and what steps are needed to dry, restore, and prevent further harm.

Water Diversion Systems are setups that redirect or control the flow of water, such as rivers or irrigation sources, using canals, pipes, dams, or barriers to manage supply, prevent flooding, and support agriculture, drinking water, and ecosystem needs.

Water Intrusion is a service that detects and addresses unwanted water entering buildings or structures. It involves inspection to find leaks or moisture, identifying sources, and applying fixes like sealing, drainage improvements, or repair work to prevent damage.

Water Intrusion Repair involves fixing leaks that let water into a structure, drying out and repairing damaged walls, floors, and insulation, and sealing vulnerable areas to prevent future moisture entry.

Water Removal Services quickly removes excess water from homes or businesses after flooding or leaks, using pumps, vacuums, and moisture checks to dry areas, prevent damage, and restore safety and normal use.

Water Seepage is a service that detects and fixes water that slowly leaks through walls, floors, or foundations. It involves inspections, moisture testing, diagnosis of causes, and repairs to prevent dampness, mold, and structural damage.

Waterproofing Contractors are professionals who seal and protect buildings from water damage, applying coatings, membranes, or sealants to basements, roofs, and foundations, and checking for leaks, drainage issues, and proper moisture barriers.

Waterproofing Specialists is a service that protects buildings from water damage by sealing foundations, walls, and roofs, fixing leaks, applying waterproof coatings, and ensuring dampness is blocked to keep interiors dry and safe.

Wet Basement Repair is a service that fixes leaks, dampness, and water intrusion in basements. It involves diagnosing moisture sources, sealing walls and floors, installing drainage or sump pumps, and restoring the space to prevent future flooding.

Window Well Drain is a service that installs or upgrades drainage around basement window wells to prevent water buildup. It involves adding proper piping, gravel, or a drainage system to direct water away from the foundation and keep your basement dry.

Yard Drainage Solutions helps fix soggy or waterlogged yards by assessing soil, grading, and installing drainage systems (like French drains, gutters, and sump pumps) to direct water away from your yard and foundation for a dry, safe outdoor space.