RSG Abatement & Demolition

AHERA Good Faith Survey

The Asbestos AHERA Good Faith Survey is a simple, documented check to assess asbestos-containing materials in a building. It involves trained inspectors collecting samples, evaluating findings, and providing a clear report to guide safe handling and compliance.

Asbestos Abatement

An Asbestos Survey is a safety check to identify asbestos in a building. It involves inspecting areas, collecting samples if needed, and reporting locations and conditions so work can be planned to avoid exposure during renovations or maintenance.

Asbestos Testing checks buildings for asbestos fibers to see if they are present and dangerous. A technician collects samples from walls, floors, or insulation, sends them to a lab for analysis, and provides results and safety guidance.

Brownfields & voluntary remediation is a process to clean up polluted sites that are unused or underused, then verify cleanup, often with incentives. It involves assessment, cleanup planning, soil and groundwater work, risk checks, and regulatory approval to reuse the land.

Clearing & grubbing is the process of removing trees, brush, roots, and debris from a site before construction, including clearing land, grubbing out stumps, and preparing the ground for grading and foundation work.

Complete site demolition is a service that safely clears and tears down a building or structure, removing all materials, debris, and utilities, and preparing the site for new construction or repurposing.

Concrete demolition is the careful breaking down and removal of concrete structures, such as walls, slabs, or foundations, using tools like jackhammers, wrecking balls, or saws, followed by cleanup and disposal of debris.

Debris removal is a service that clears away rubble, trash, and leftover materials from a site. It involves collecting, sorting, loading, transporting, and disposing of waste safely and efficiently so the area is clean and usable again.

Fire damage cleanup & repair is a service that cleans up smoke, soot, and water damage after a fire and then restores the structure and finishes, including removal of debris, deodorization, drying, restoration of walls, floors, and fixtures to pre-fire condition.

Flood Cuts is a cleaning service that removes water-damaged drywall and submaterial, then replaces it with new, dry material to stop moisture from spreading and restore walls after flooding or leaks, ensuring quicker drying and reduced mold risk.

Flooring is a service that installs or replaces the surfaces on floors, such as wood, tile, carpet, or vinyl. It involves measuring, preparing the area, choosing materials, cutting, fitting, and finishing for a smooth, durable floor.

General cleanup is a service that organizes and tidies a space or data, removing unnecessary items, sorting items, and restoring order for easier use and better appearance.

High Reach Demolition is a service that safely dismantles and removes tall buildings or structures using specialized machinery, such as long-reach cranes and hydraulic tools, cutting and taking apart sections from the top down while controlling dust and debris.

Industrial demolition is safely tearing down large buildings and structures, using planed methods, controlled debris removal, site cleanup, and environmental protections to minimize dust, noise, and hazards while reclaiming usable materials.

Interior demolition is the careful removal of interior structures such as walls, floors, and fixtures inside a building to clear space for renovations, remodels, or repairs, while preserving the building’s structure and safety.

Lead Encapsulation / Stabilization is a service that seals and secures lead materials to prevent exposure and contamination, often using protective barriers and stabilization techniques to keep the lead safely contained during handling, storage, and transport.

Lead Removal is a service that safely tests for and removes lead contamination from homes, soils, or water. It involves assessment, containment, cleaning or replacement of affected materials, and steps to prevent future exposure.

Lead Testing is a service that checks for lead in your materials or environment. It involves collecting samples (like paint, dust, soil, water), sending them to a lab, and receiving a report on lead levels and safety recommendations.

Mold Mitigation is a service that removes and prevents mold growth in buildings. It includes inspecting, isolating affected areas, cleaning and drying to stop moisture, treating surfaces, and fixing sources of moisture to prevent reoccurrence.

Mold remediation is the safe removal and cleaning of mold growth from indoor areas. It involves identifying moisture sources, containing the area, removing contaminated materials, using specialized equipment, and restoring the space to healthy, mold-free condition.

Mold inspection is a professional check to find mold growth in a home or building, including where it hides. It involves visual checks, moisture and air tests, and notes on health risks, water sources, and remediation steps.

Multi-story demolition is the controlled tearing down of tall buildings, often using cranes, implosion or mechanical wrecking. It involves safety planning, securing the site, removing utilities, and sorting debris for recycling while protecting nearby structures and people.

Remodeling is updating or changing parts of a home to improve looks, layout, or function. It involves planning, budgeting, and selecting materials, then renovating rooms, structures, or systems like kitchens, baths, or foundations to meet new needs.

Selective demolition is the careful teardown of specific parts of a building, such as removing fixtures, walls, or systems, while preserving the rest. It involves planning, sorting debris, and recycling materials to minimize waste and disruption.

Water damage-related cleanup & repair is services that quickly remove excess water, dry and dehumidify the area, assess and fix structural and belongings damage, and restore the space to its normal condition after floods, leaks, or spills.

Water damage-related mold removal is the process of finding and safely removing mold that grows after water intrusion, drying the area, cleaning affected surfaces, treating remaining moisture, and preventing future mold growth through repairs and prevention steps.