Orbit Roofing & Renovations

Acoustical ceiling installation involves placing sound-absorbing ceiling tiles or panels into a grid system to reduce noise, improve acoustics, and hide wiring. It covers planning, measuring, cutting, fitting tiles, and ensuring proper ventilation and fire safety compliance.

Attic venting is the process of letting hot air and moisture escape from your attic through vents, fans, or soffit openings. It involves installing or maintaining vents, ensuring airflow, and reducing heat buildup and moisture to protect the home.

Attic venting installation involves adding or upgrading vents in an attic to improve airflow, reduce moisture, and prevent heat buildup. It includes planning vent placement, installing soffit and roof vents, and sealing gaps for proper, balanced ventilation.

Attic venting repairs fix and restore the airflow in your attic by inspecting vents, ducts, and insulation, repairing or replacing damaged vents, sealing leaks, and ensuring proper vent placement to prevent moisture, heat buildup, and energy loss.

Baseboard installation is the process of measuring, cutting, and attaching the trim along the bottom edge of walls to cover gaps and protect corners, usually involving tools like a saw, adhesive, nails, and careful alignment to match room finish.

Bathroom countertop resurfacing is a service that revives worn countertops by removing damage, applying a new durable finish or overlay, and sealing it to look like new. It involves cleaning, prepping, applying material, and sealing for lasting protection.

Bathroom tile reglazing is the process of renewing worn tile surfaces by applying a new glaze coating. It involves cleaning, repairing cracks, priming, and applying a glossy layer to refresh color and shine without removing the tiles.

Bathtub installation is the process of placing and securing a new bathtub in a bathroom, connecting plumbing for water supply and drainage, sealing to prevent leaks, and ensuring proper fit, level, and safety for use.

Bathtub refinishing is a process that revitalizes a worn tub by cleaning, repairing chips, and applying a new durable coating to restore a smooth, glossy surface, improving appearance and lifespan without a full replacement.

Bathtub reglazing is a renovation service that refreshes a worn tub by cleaning, repairing minor chips, and applying a new glossy coating to restore color, smoothness, and durability without a full replacement.

Bathtub repair is fixing cracks, chips, leaks, or worn surfaces in a bathtub so it looks and works well again. It involves inspecting the tub, sealing leaks, resurfacing or refinishing, replacing damaged parts, and ensuring water, drainage, and safety features function correctly.

Bathtub replacement is upgrading or swapping an old tub for a new one. It involves measuring, removing the existing tub, plumbing and tile work as needed, installing the new tub, sealing, and finishing touches like fixtures and trim for a watertight, functional bath.

Bathtub resurfacing is a process that refinishes a worn or damaged tub by sealing and coating its surface. It involves cleaning, repairing chips, applying a durable glaze or epoxy, and curing to restore a smooth, like-new finish without a full replacement.

Carpet cleaning is a service that removes dirt, stains, and odors from carpets using vacuuming, cleaning solutions, and sometimes steam or hot water extraction to refresh and restore the carpet’s appearance and hygiene.

Carpet installation is fitting new carpet to cover floors. It involves measuring rooms, choosing carpet and padding, removing old flooring, cutting and seaming pieces, stretching the carpet, and securing edges for a smooth, secure finish.

Ceiling repair is fixing damage to a ceiling, such as cracks, leaks, or holes. It involves inspecting the area, patching or replacing damaged material, smoothing surfaces, and repainting or refinishing to restore a safe, smooth ceiling.

Ceramic tile flooring installation is laying down laid tiles on floors, preparing the surface, cutting tiles to fit, applying adhesive, and finishing with grout and sealing to create a durable, easy-to-clean floor.

Commercial floor coating is the application of durable protective layers to factory, warehouse, or business floors to resist wear, spills, and stains. It involves surface cleaning, prepping, applying primer, coating, and a cured sealant for a smooth, easy-to-clean finish.

Concrete epoxy floor installation is applying a special resin coating to a concrete surface to create a durable, smooth, and glossy floor. It involves cleaning, preparing, mixing epoxy, and applying multiple coats, followed by curing for a hard, chemical-resistant finish.

Concrete floor polishing is a service that buffs and smooths a concrete surface to a shiny, durable finish. It involves cleaning, grinding to remove imperfections, and applying sealers or densifiers to protect and enhance shine.

Concrete patio floor installation is the process of preparing a outdoor ground, pouring and leveling concrete to create a flat, durable patio surface for seating, walking, and outdoor activities, including finishing and curing the concrete for a solid finish.

Concrete staining is a process that colors concrete surfaces with chemical stains or dyes to create decorative patterns and tones. It involves preparing the surface, applying stain, and sealing to protect the color and enhance durability.

Custom kitchen cabinet construction is a tailored process to design and build made-to-fit cupboards, drawers, and materials for a kitchen, including measurements, material selection, doors, finishes, and precise installation for a unique, high-quality setup.

Drywall finishing is the process of smoothing and sealing wall panels after installation. It includes taping joints, applying compound (mud), sanding, and priming so walls are smooth and ready for paint or wallpaper.

Drywall installation is the process of hanging and securing large panels of gypsum board to walls and ceilings, then taping, mudding, sanding, and finishing them for a smooth surface ready for paint or wallpaper.

Drywall repair fixes holes, cracks, or water damage in walls or ceilings. It involves cleaning, cutting a patch, securing it, sealing seams, sanding smooth, and applying paint to restore a seamless surface.

Drywall texturing is applying a textured coating to walls or ceilings to hide seams and add character. It involves mixing a texture compound and using tools or spray to create patterns, then drying and finishing with paint or coatings.

Epoxy floor coating is a durable, glossy layer applied to concrete floors using a resin mix that bonds to the surface. It creates a hard, smooth, washable floor ideal for garages, warehouses, and workshops, often with color and anti-slip options.

Exterior painting is applying paint to the outside surfaces of a building to protect it, refresh its look, and extend its life. It involves cleaning, scraping old paint, priming, and applying multiple coats of durable exterior paint.

Fan installation is the process of setting up a ceiling or wall fan, including mounting, wiring, and connecting it to power, aligning blades, and testing for safe operation to improve cooling and air circulation in a room.

Fan repair is fixing a malfunctioning fan, such as a ceiling, box, or portable unit. It involves diagnosing issues, replacing worn parts like bearings or belts, wiring checks, and testing to ensure the fan runs smoothly and safely.

Fire damage cleanup & repair is a service that restores a damaged building after a fire. It includes assessing smoke and soot, securing the site, removing damaged materials, cleaning and deodorizing, and repairing damaged structures to return the property to safe, habitable condition.

Flood cleanup is a service that removes water, dries and sanitizes spaces after flooding, and repairs damage. It involves locating moisture, removing standing water, drying out materials, cleaning debris, deodorizing, and restoring walls, floors, and furnishings.

Flood restoration is a service that cleans, dries, and repairs homes after flooding. It involves water removal, drying out wet structures, removing damaged materials, sanitizing to prevent mold, and restoring floors, walls, and insulation to safe, livable condition.

Floor polishing is cleaning and smoothing a floor to make it shine. It involves removing dirt, scratches, and dullness, then buffing with a polishing machine or materials to create a glossy, even surface on materials like wood, tile, or stone.

Floor refinishing is the process of restoring a worn wooden floor by sanding away old finish, repairing any damage, and applying new stain or protective sealant to bring back a smooth, glossy surface and improve durability.

Floor repairs & maintenance is a service that fixes damaged floors and keeps them in good condition, including patching cracks, replacing worn boards or tiles, sanding or refinishing, sealing, and routine upkeep to prevent future problems.

Floor tile installation is the process of laying durable tiles on floors to create a smooth, cut-to-fit surface. It involves measuring, preparing the area, laying and aligning tiles with adhesive, cutting tiles to fit edges, and sealing or grouting for a finished, level floor.

Floor tile restoration is reviving worn or damaged tiles to look like new. It involves cleaning, repairing chips or cracks, regrouting, sealing, and sometimes resurfacing or replacing missing pieces to restore color, shine, and durability.

Flooring is a service that installs or replaces the material on your floors, such as wood, tile, laminate, or carpet. It involves measuring, removing old flooring if needed, preparing the surface, and laying and finishing the new floor to look and wear well.

Flooring repair is fixing damaged floors to make them look and work like new. It involves inspecting for wear or cracks, replacing or restoring boards or tiles, sanding or refinishing, sealing, and ensuring a smooth, safe surface.

Furniture assembly is a service where a professional builds or puts together ready-to-use furniture, following instructions. It involves organizing parts, using tools, tightening screws, and ensuring the item is stable and ready to place in your space.

A garage floor epoxy coating is a durable, chemical-resistant sealant applied to concrete floors. It involves cleaning, priming, and applying a hard epoxy layer that creates a glossy, smooth surface that’s easier to clean and more resistant to stains and wear.

Granite countertop installation is a service that measures, fabricates, and installs durable granite countertops in kitchens or bathrooms. It involves selecting thickness and color, custom cutting to fit sinks and appliances, and secure, polished mounting with finishing edges.

Granite countertop repair restores scratched, chipped, or cracked granite surfaces using specialized fillers, polishing, and sealing to blend in with the surrounding countertop and protect it from future damage.

Gutter cleaning is the process of removing leaves, dirt, and debris from the gutters and downspouts to ensure proper water flow away from your home, preventing blockages, leaks, and water damage.

Gutter installation is adding rain gutters along the edge of a roof to direct water away from the building. It involves measuring, selecting the right gutter type, cutting to fit, attaching hangers and downspouts, sealing joints, and testing for leaks.

Gutter repairs fix damaged or leaking gutters on your home, including sealing leaks, realigning, replacing broken sections or hangers, and ensuring proper drainage to prevent water damage and protect your walls and foundation.

Install flooring means putting new floor material, like wood, tile, or carpet, into a room. It involves measuring, removing old flooring, preparing the subfloor, cutting pieces to fit, and securing them evenly for a smooth, durable surface.

Insulation services involve installing or upgrading materials in walls, ceilings, and floors to keep heat in during winter and out during summer, improving comfort and energy efficiency; it may include assessing, removing old insulation, and adding batts, foam, or blown-in options.

Interior painting is the service of applying new paint to the inside walls, ceilings, and trim of a home or building, including prep work like cleaning, sanding, patching, priming, and then applying coats for a fresh, durable finish.

Interior repairs cover fixing and restoring the inside of a building, such as walls, ceilings, floors, doors, and fixtures. It includes patching, painting, replacing damaged surfaces, sealing gaps, and making spaces safe and ready for use.

Interior structural repairs fix and restore the building’s inside framework, such as walls, floors, and supports, after damage or wear. It involves assessments, replacing or reinforcing damaged beams or supports, patching surfaces, and ensuring safety and stability.

Kitchen cabinet design is planning and creating custom storage for kitchens, choosing materials, colors, and layouts, measuring spaces, and detailing doors, drawers, and hardware to fit lifestyle and space while coordinating with appliances and countertops.

Kitchen cabinet door replacement is swapping old doors for new ones on your cabinets to refresh the look. It involves measuring, selecting doors and hardware, removing the old doors, mounting the new ones, and adjusting hinges for proper alignment.

Kitchen cabinet installation is putting in new cabinets and hardware in your kitchen. It involves measuring, removing old units if needed, fitting and leveling the cabinets, attaching them to walls, and adding doors, drawers, and finishing touches.

Kitchen cabinet refacing is replacing the cabinet doors, drawer fronts, and trim while leaving the existing cabinet boxes in place. It involves selecting new finishes, styles, and hardware, then updating hinges and hardware for a refreshed look at a lower cost and shorter project time.

Kitchen cabinet refinishing is the process of refreshing cabinet surfaces without a full replacement. It involves cleaning, sanding, staining or painting, and sealing the wood or cabinet faces to give them a new look and protect them.

Kitchen countertop installation is replacing or adding durable surfaces on the top of your cabinets for cooking and prep. It involves measuring, selecting materials, cutting to fit, securing with adhesive or screws, sealing edges, and finishing for a smooth, clean surface.

Kitchen countertop repair is fixing damaged surfaces like chips, scratches, cracks, or loose seams on counters. It involves assessing the damage, repairing or filling imperfections, smoothing and sealing the surface, and restoring its appearance and durability for everyday use.

Kitchen countertop replacement is the process of removing old countertops and installing new ones to update or repair your kitchen surfaces, including measurements, cutting, fitting, sealing, and securing the new countertops for a refreshed workspace.

Kitchen design is the process of planning and arranging your kitchen space, choosing cabinets, counters, and appliances, and creating a functional, stylish layout that suits how you cook, store, and move around the room.

Laminate floor installation is the process of fitting pre-made, wood‑look panels over a prepared subfloor. It involves measuring, cutting, and locking the planks together with underlayment for padding and moisture protection, finishing edges, and cleaning up.

Marble floor installation is the process of placing and securing marble tiles on a floor surface, including measuring, prepping the subfloor, cutting tiles, setting with mortar, grouting joints, cleaning, and sealing for a durable, polished finished floor.

Marble floor repair is fixing damaged marble tiles or surfaces to restore a smooth, even, and shiny floor. It involves cleaning, filling cracks or chips, grinding or polishing for a uniform finish, and sealing to protect against future damage.

Mold cleaning is removing visible mold and biofilm from surfaces and spaces, then cleaning or treating areas to prevent growth. It involves inspecting for moisture, cleaning with appropriate products, drying areas, and addressing underlying causes to reduce recurrence.

Mold damage restoration is a service that cleans up and repairs areas affected by mold after water damage, removes mold growth, dries the space, treats it to prevent regrowth, and restores surfaces to their original condition.

Mold inspection is a professional check for mold growth in a building, using visual checks and sometimes tools to detect moisture and hidden mold. It involves inspecting rooms, measuring humidity, and listing findings and recommended actions.

Mold mitigation is the process of removing mold growth from a home or building and fixing moisture problems to prevent it from returning. It involves inspecting for moisture, containing the area, cleaning and sanitizing affected surfaces, and repairing leaks.

Mold remediation is cleaning water-damaged areas, removing mold, and fixing moisture problems to prevent recurrence. It involves assessment, containment, mold removal, cleaning, and repairs to protect indoor air quality.

Outdoor kitchen remodeling is updating and upgrading your outdoor cooking area, including cabinets, countertops, appliances, lighting, plumbing, seating, and weatherproof materials to create a functional, durable, and stylish space for cooking and entertaining outside.

Paint indoors is a service that coats your interior walls and ceilings with fresh color, using brushes, rollers, or sprayers. It involves preparing surfaces, choosing finishes, applying paint evenly, and cleaning up after the job.

Painting is creating art or a protective coating on surfaces using color, brushes, or tools. It involves planning a design or covering a surface, choosing pigments, mixing colors, applying layers, and drying to finish a decorative or functional work.

Plaster repair fixes damaged wall plaster by patching cracks or holes with new plaster, smoothing, drying, and priming so walls look even and ready for painting or finishing.

Plastering is the process of coating walls or ceilings with plaster to create a smooth, durable surface. It involves applying a plaster mix, smoothing it, and letting it dry, often covering damaged areas and preparing the wall for painting or wallpaper.

Plumbing is the service of installing and fixing pipes, fittings, and fixtures that carry water, gas, and waste in homes or buildings. It involves repairs, maintenance, pipe replacement, leak detection, and ensuring safe, working systems.

Plumbing fixture installation is the process of setting up items like sinks, toilets, faucets, and showerheads in a home or building, including measuring, fitting pipes, securing fixtures, connecting water lines, and testing for leaks to ensure proper function.

Popcorn ceiling removal is a home service that smooths or refines textured ceilings by stripping the popcorn-like finish, then repairing and repainting for a clean, flat look. It involves prep, safe material removal, sanding, and repainting.

Remodeling is upgrading or changing the inside of a space, like a kitchen or bathroom. It involves planning, removing old fixtures, building or updating walls, wiring, plumbing, flooring, and finishes to improve layout, function, and style.

Repair flooring is fixing damaged floors to restore a smooth, safe surface. It involves assessing damage, filling cracks or holes, sanding, refinishing, and sometimes replacing worn sections or tiles to match the existing floor.

Repair water fixtures involves fixing sinks, taps, toilets, or shower components that leak, drip, or malfunction, replacing worn parts, tightening connections, and restoring proper water flow and control to prevent waste and damage.

Roof damage repair is fixing problems caused by leaks, storms, or wear, restoring a roof’s structure and waterproofing. It involves inspecting for damage, replacing or repairing damaged shingles or tiles, sealing gaps, and ensuring the roof is watertight.

Roof inspection is a service where a trained professional checks the roof for damage, wear, leaks, and overall condition. It involves a visual walkover, noting issues, recording measurements, and recommending repairs or maintenance to prevent leaks and extend the roof’s life.

Roof installation is the process of fitting a new roof on a building, including removing old materials, laying underlayment, installing shingles or panels, sealing seams, and finishing edging to protect against weather and improve insulation.

Roof repair is fixing leaks, damaged shingles, or structural issues on a roof to prevent water damage and restore strength. It involves inspecting, replacing worn materials, sealing joints, and ensuring proper drainage for a durable, safe roof.

Roof repair for storm & wind damage fixes roofs damaged by storms, wind, or hail. It includes inspecting for leaks or structural harm, replacing or patching shingles, sealing seams, and restoring stability to prevent further water intrusion.

Roofing is the service of installing, repairing, or replacing the top covering of a building. It involves inspecting the roof, choosing materials (like shingles or metal), and ensuring it keeps water out, insulates, and lasts against weather.

Sewage cleanup is professional cleaning and sanitizing of areas contaminated by sewage leaks or spills, removing dirty water, solids, and odors, then disinfecting surfaces, addressing health risks, and restoring safety and cleanliness in the affected space.

Shower refinishing is a service that refreshes and coats the inside of a worn shower to look like new. It involves cleaning, repairing minor chips, and applying a durable resin or coating to restore color, shine, and waterproofing without a full replacement.

Skylight installation is the process of fitting a window in a roof to bring in natural light. It involves planning, measuring, cutting the roof, installing the skylight unit, sealing to prevent leaks, and finishing surrounding interior and exterior areas.

Skylight repair is fixing a damaged skylight window in a roof, sealing leaks, replacing broken glass or frames, and ensuring it opens, closes, and insulates properly to prevent water leaks and drafts.

Stair flooring is the process of installing or upgrading the steps’ surface with materials like wood, laminate, vinyl, or carpet to improve look, durability, and traction. It involves measuring, cutting, fitting, and securing each tread and riser for a smooth, safe finish.

Stucco installation is the process of applying a cement-like exterior coating to walls. It involves preparing the surface, applying multiple layers of stucco, smoothing it, and sealing to protect against weather and create a durable, finished exterior look.

TV mounting is securely attaching a television to a wall or stand, usually with a bracket. It involves choosing the right mount, finding studs, wiring safely, leveling the TV, and concealing cables for a neat, space-saving setup.

Tile work installation is the process of fitting and securing tiles on walls or floors, including measuring, cutting, aligning, waterproofing, and grouting to create a durable, clean, finished surface for bathrooms, kitchens, and floors.

Tile work replacement is when damaged or loose tiles are removed and new ones are installed to restore a smooth, watertight surface on floors or walls, often involving cleaning, spacing, grouting, and sealing for a durable finish.

Water damage-related cleanup & repair is a service that removes excess water, dries and sanitizes affected areas, repairs structural damage, and restores your home after floods, leaks, or spills to prevent mold and further harm.

Water damage-related mold removal is a service that cleans up mold caused by leaks or floods. It involves drying the area, removing moldy materials, treating surfaces to prevent regrowth, and restoring the space to safe, normal condition.

Water damage-related pest control involves inspecting how excess moisture from floods or leaks attracts pests, then cleaning and drying the area, fixing the source of moisture, removing damp materials, and treating for pests to prevent further infestation.

Water removal is the process of extracting excess water from a space or item, typically using pumps, vacuums, or absorbent materials to prevent damage, dry surfaces, and restore normal conditions after flooding, spills, or leaks.

Wood floor installation is fitting wooden boards or planks to a floor, preparing the surface, laying underlayment and moisture barriers, cutting pieces to fit, nailing or gluing them down, sanding, and finishing with stain or sealant for a durable, attractive floor.

Wood floor refinishing is the process of restoring a worn or damaged wood floor by sanding away the top layer, repairing imperfections, and applying fresh finish or stain to protect and improve its appearance.

Wood floor repairs fix damaged or worn wood floors, including filling cracks, replacing broken boards, sanding and refinishing, and restoring smooth, even surfaces so the floor looks and works like new.

Wood floor restoration is fixing damaged or worn wooden floors to bring back their shine and smoothness. It involves cleaning, sanding, repairing cracks, staining or sealing, and applying a protective finish to extend life and improve appearance.

Wood floor sanding is the process of smoothing a wooden floor by removing old finish and uneven areas with a sander, then refinishing it with stain or sealant to restore a durable, even surface.

Wood floor tile installation is placing wood-look tiles on a floor, cutting to fit, ensuring a level surface, using adhesive or mortar, and sealing where needed. It includes prep, layout, grouting or finishing, and cleaning after the install.