Jazco Services

Baseboard installation is the process of fitting decorative trim along the bottom edge of walls to cover gaps, protect walls, and create a finished look. It involves measuring, cutting to length, mitering corners, and nailing or securing the boards in place.

Carpet Cleaning is a service that revives carpets by removing dirt, stains, and odors using specialized machines and cleaners, followed by drying. It involves vacuuming, treating spots, deep cleaning, and ensuring the carpet is fresh and ready to use.

Carpet installation is placing new carpet on your floors. It involves measuring rooms, removing old flooring, prepping the surface, cutting the carpet to fit, tucking or bonding edges, and securing it with padding and seams for a smooth, even finish.

Carpet steam cleaning uses hot water and gentle cleaning solutions injected into the carpet, then pulled out with steam and suction to lift dirt, kill germs, and refresh fibers, often with drying time and sometimes deodorizing.

Ceramic tile flooring installation is the process of placing flat ceramic tiles on floors, including measuring, preparing the surface, spreading adhesive, laying tiles evenly, grouting gaps, and finishing with sealant for a durable, easy-to-clean floor.

Commercial floor coating is a durable protective layer applied to business floors to resist wear, chemicals, and stains. It involves cleaning, prepping, applying a coating (like epoxy or polyurethane), and curing for a smooth, long-lasting surface.

Concrete epoxy floor installation is applying a durable resin coating to concrete floors to create a smooth, tough surface that resists stains, chemicals, and wear. It involves cleaning, repairing cracks, priming, and applying epoxy layers for a sealed, glossy finish.

Concrete floor polishing is smoothing and shining a concrete surface using heavy grinders and polishing pads, removing roughness, stains, and imperfections to create a durable, glossy finish for homes or businesses.

Concrete patio floor installation is the process of preparing the ground, laying and leveling concrete, and finishing a durable outdoor floor for patios, including forms, curing, and surface texture or color choices.

Concrete staining is a decorative process that adds color to concrete surfaces using acid- or water-based stains, techniques, and sealers. It involves cleaning, preparing the surface, applying stain, and sealing to protect and enhance the look.

Drywall installation is the process of fitting large wall panels to create room walls and ceilings. It involves measuring, cutting, hanging sheets, fastening them to studs, taping joints, and applying mud, sanding, and finishing for a smooth surface ready for paint or wallpaper.

Drywall repair fixes damaged walls or ceilings by patching holes, cracks, or dents, then taping, mudding, sanding, and painting to restore a smooth, seamless surface that matches the surrounding area.

Epoxy floor coating is a durable, seamless floor finish made from epoxy resin that is poured and spread over concrete. It hardens into a glossy, chemical-resistant surface that cleans easily and protects against wear, spills, and stains.

Exterior painting is applying protective and decorative paint to the outside surfaces of a building. It involves cleaning, scraping, priming, choosing weather-resistant paints, and applying multiple coats to doors, siding, trim, and surfaces to look good and last longer.

Fan installation is the process of putting a ceiling or exhaust fan in a room or area. It involves planning placement, wiring, mounting the fixture, wiring safety, and testing to ensure it runs smoothly and safely.

Fan repair is fixing a broken or noisy fan so it runs safely and smoothly. It involves diagnosing problems, replacing worn parts like bearings or blades, checking electrical connections, and testing performance to restore proper cooling or airflow.

Flood Restoration is a service that cleans up and repairs water damage after flooding, removing water, drying out areas, assessing for mold, and restoring walls, floors, and belongings to their pre-flood condition.

Floor polishing is cleaning and shining surfaces to make them smooth, bright, and slip-resistant. It involves removing dirt, scratches, and dullness with cleaners, buffers, and sometimes grinding or sealing to protect and extend the floor’s life.

Floor refinishing is the process of restoring a worn or damaged wooden floor by removing the old finish, sanding the surface smooth, and applying new stain or sealant to protect and refresh the look of the floor.

Floor repairs & maintenance covers fixing damaged floors, replacing worn boards, smoothing uneven surfaces, sealing, and routine upkeep to extend life and keep spaces safe and clean.

Floor tile installation is the process of fitting and securing ceramic, porcelain, or stone tiles on floors. It involves measuring, preparing the surface, mixing and applying adhesive, laying tiles with spacers, cutting tiles to fit edges, and sealing grout for a finished, durable floor.

Floor tile restoration is the process of cleaning, repairing, and restoring worn or damaged tiles to bring back their original look and durability. It involves cleaning, resealing, regrouting, replacing broken tiles, and sometimes polishing or refinishing the surface.

Flooring repair is fixing damaged floors to restore a smooth, safe surface. It involves inspecting for cracks, dents, or loose boards, replacing or patching damaged sections, refinishing, and sealing to match the surrounding floor.

Furniture assembly is a service where a professional builds and fits together ready-to-use furniture, following instructions. It involves organizing parts, using tools, attaching components, and checking stability so the item is ready to place in your home.

Garage floor epoxy coating is a durable, glossy finish applied to concrete floors. It involves cleaning, prepping, and applying epoxy resin in layers to seal, protect, and make the floor easier to clean and resistant to stains and wear.

General carpet cleaning is a service that cleans carpets to remove dirt, stains, and odors using vacuums, pretreatment, and gentle washing or steam cleaning, plus deodorizing and final grooming to leave floors fresh and refreshed.

Grout color sealing is a service that applies a color sealant to tiled grout to protect it from stains and moisture, while giving the grout a uniform color. It involves cleaning, applying the sealer, and curing for a durable, easier-to-clean finish.

Gutter cleaning is removing leaves, dirt, and debris from rain gutters to ensure smooth water flow away from your home, preventing blockages, leaks, and damage. It involves inspecting, scooping out debris, flushing with water, and checking for leaks or loose fittings.

Install flooring means putting new floor material, like wood, tile, or carpet, in a room. It involves preparing the surface, laying or clicking pieces into place, trimming to fit, and finishing edges for a smooth, durable floor.

Laminate floor installation is the process of placing pre-made, layered flooring that resembles wood or stone onto a prepared subfloor. It involves measuring, underlayment, aligning planks, and clicking them together for a smooth, durable finish.

Marble floor installation is the process of laying marble tiles on a floor, including measuring, preparing the surface, cutting tiles, applying adhesive, setting tiles evenly, grouting, sealing, and finishing for a durable, polished space.

Marble floor repair is fixing damaged marble floors, including cracks, chips, dull surfaces, or loose tiles. It involves cleaning, polishing, filling gaps, re-sealing, and sometimes replacing damaged pieces to restore smooth, glossy, even flooring.

Paint indoors is a service that covers interior walls, ceilings, and surfaces with paint to refresh color and finish. It includes prep like cleaning, priming, protecting floors, and applying multiple coats for a smooth, durable result.

Plumbing fixture installation is placing and connecting items like sinks, toilets, faucets, and drains to a home's water and waste pipes, ensuring proper fit, seals, and functionality for safe, leak-free use.

Remodeling is updating or changing a home’s layout, rooms, or features to improve functionality and look. It can involve demolition, new cabinets, flooring, fixtures, plumbing, wiring, and finishes, often to suit needs or resale value.

Repair flooring is fixing damaged floors to restore flat, smooth, and safe surfaces. It involves inspecting for cracks or wear, replacing or patching boards or tiles, sanding and refinishing, sealing, and leveling to match surrounding areas.

Repair water fixtures fixes leaks, drips, or faulty components in sinks, faucets, toilets, and pipes. It involves diagnosing the problem, replacing worn parts like valves or seals, tightening connections, and testing for proper, leak-free function.

Stair flooring is the process of covering or renewing the steps of a staircase with materials like wood, laminate, vinyl, or carpet. It involves measuring, cutting, fitting, and securing the material to each tread and riser for a durable, attractive finish.

Tile work installation is the process of placing and setting tiles on floors, walls, or surfaces. It involves preparing the area, measuring and cutting tiles, applying adhesive, laying tiles in a pattern, spacing, grouting, and sealing for a finished, durable surface.

Tile work replacement is a service where damaged or old tiles are removed and new ones are installed, including preparing the surface, applying adhesive, leveling, grouting, and sealing for a durable, refreshed floor or wall finish.

Upholstery cleaning is the process of deep-cleaning furniture fabrics like sofas and chairs to remove dirt, stains, and odors. It involves vacuuming, treating stains, and using appropriate cleaners or steam to refresh fabrics without damaging them.

Wood floor installation is the process of placing new wooden planks on a floor surface. It involves measuring, preparing the floor, laying and securing boards, trimming, finishing with stain or sealant, and sometimes underlayment or stairs work to create a smooth, durable floor.

Wood floor refinishing is restoring a worn wooden floor by sanding away old finish, repairing minor damage, and applying new protective coating to restore color, sheen, and durability, making it look like new again.

Wood floor repairs is fixing damaged wooden floors, including replacing broken boards, filling gaps, smoothing squeaks, refinishing rough spots, and restoring color and smoothness so the floor looks and works like new.

Wood floor restoration is reviving worn or damaged wooden floors to look like new again. It involves cleaning, repairing gaps or cracks, sanding away scratches, sealing, and applying finishes to protect and enhance the wood’s color and durability.

Wood floor sanding is the process of smoothing worn wooden floors using machines to remove old finish and rough grain, then refinishing with stain or varnish to restore a clean, even look and protect the surface.

A service that lays wooden floor tiles, matching planks to create a wood-look floor. It involves measuring the space, prepping the subfloor, cutting tiles, fitting joints, and finishing with adhesives, grout, and a sealant for durability and a smooth finish.