ABM Blasting LLC

Abrasive blasting is a cleaning and surface prep method that uses high-speed abrasive media to remove rust, paint, and contaminants from surfaces, smooth rough areas, and create a clean, ready-to-coat finish.

Blasting & Coatings is a service that cleanly prepares metal surfaces by blasting away rust and old coatings, then applies protective coatings or paints to prevent corrosion and improve appearance and durability.

Boat Blasting Service uses high-pressure, environmentally safe blasting to remove paint, barnacles, and grime from boats’ hulls, preparing surfaces for coating. It involves cleaning, sanding, and rinsing to restore smoothness and improve adhesion.

Boat Restoration is the careful repair and refresh of an old or damaged boat, bringing it back to good condition. It involves cleaning, repairing hulls, engines, decks, hardware, painting, and sometimes upgrading safety and performance features to restore value and usability.

Bottom Paint Removal is professional cleaning to remove old antifouling paint from a boat’s hull. It involves careful scraping or media blasting, dust and residue containment, and preparing the surface for a fresh coat or coating.

Car Body is a service that repairs and restores the exterior of a vehicle, including panels, paint, and finishing. It involves fixing dents, rust, and damage, aligning panels, repainting, and protecting the surface to restore the car’s look and value.

Chemical Cleaning is a process that uses chemicals to remove dirt, pollutants, or corrosion from surfaces, equipment, or materials. It involves selecting safe cleaners, applying or circulating them, and rinsing to leave the item clean, protected, and ready for use.

Coating & Paint is a service that applies protective and cosmetic finishes to surfaces, using primers, coatings, and paints. It involves surface prep, selecting materials, and applying layers to achieve durability, appearance, and weather resistance.

Coatings Removal is the process of safely stripping surface finishes, paints, or protective coatings from a material to restore its original look or prepare it for new coatings, using appropriate methods and safety measures.

Concrete Coating is a protective layer applied to existing concrete floors or surfaces. It involves cleaning, prepping, and applying a durable coating (like epoxy or polyurethane) to improve durability, aesthetics, and ease of maintenance.

Dry ice blasting is a cleaning method that uses solid CO2 pellets propelled at high speed to lift dirt and contaminants from surfaces without leaving residue. It freezes, expands, and abrades grime, then disappears as dry ice sublimates, simplifying cleanup.

Fire Restoration is the process of cleaning up and fixing a property after a fire. It involves assessing damage, removing smoke and debris, drying moisture, repairing or replacing burnt materials, and restoring the home to safe, functional condition.

Grit blasting is a surface-cleaning process that blasts tiny abrasive particles at a material to remove rust, paint, and debris. It randomizes roughness to prepare surfaces for coating or bonding, using high-velocity grit and pressurized air.

High Pressure Cleaning uses a powerful jet of water to blast away dirt, grime, mold, and stains from surfaces like walls, driveways, and decks. It involves a high-pressure machine, appropriate nozzles, and safety measures for effective cleaning without damage.

Industrial Cleaning is professional cleaning of factories, plants, and equipment to remove dust, grease, and contaminants. It involves safe cleaning methods, using specialized tools, chemicals, and protocols to keep workspaces hygienic, compliant, and productive.

Log cabin blasting is the controlled use of explosive charges to clear or modify a log cabin’s structure, removing or reshaping timber, with safety protocols, permits, and skilled handling to minimize damage and risk during demolition or renovation.

Media blasting is a cleaning or finishing process that uses compressed air to shoot tiny abrasive particles at a surface. It removes paint, rust, or scale, smooths surfaces, and prepares them for coatings, using media like sand, glass, or walnut shells.

Mobile Sandblasting is on-site abrasive cleaning that uses a blast of compressed air and abrasive media to remove paint, rust, and grime from surfaces, restoring texture and prepping for coating, all without moving the object.

Mobile log cabin surface preparation is a on-site service that cleans, strips, sands, repairs, and primes log cabin exterior surfaces to remove dirt, old coatings, and damage, ensuring the surface is ready for staining or sealing.

Mold remediation is the process of removing mold from indoor spaces and fixing moisture problems to prevent regrowth, including identifying the source, cleaning affected areas, and restoring safe, healthy indoor air.

Paint Removal Sandblasting uses pressurized abrasive material to blast away old paint from surfaces, preparing them for coating. It involves masking areas, choosing the right abrasive, and controlling dust and heat to safely remove layers without damaging the base material.

Pool resurfacing is the process of repairing and refreshing the interior of a swimming pool. It involves removing old plaster or coating, repairing cracks, and applying a new surface finish like plaster, pebble, or tile to restore beauty, durability, and water shine.

Rust Removal Sandblasting is a cleaning service that blasts a pressurized abrasive material onto metal surfaces to remove rust, paint, and grime, restoring smooth, ready-to-coat metal. It involves masking areas, blasting at controlled pressure, and surface inspection.

A sandblasting machine is a device that blasts abrasive particles at a surface to clean, smooth, or etch it. It involves a pressurized blast media, a nozzle, and a cabinet or chamber where the item is treated, with safety gear required.

Steam Cleaning is a cleaning service that uses high-temperature steam to loosen dirt, sanitize surfaces, and remove grime from floors, upholstery, bathrooms, and kitchens, often with minimal chemicals for a fresh, deodorized result.

Surface Cleaning is a service that quickly removes dust, dirt, and grime from flat surfaces like counters, desks, tables, and screens using safe cleaners and microfiber cloths to leave them clean and streak-free.

Vapor blasting is a cleaning process that uses a wet abrasive mix in a vapor stream to safely remove dirt, rust, and deposits from surfaces without scratching. It combines water, detergent, and fine abrasive to gently lift grime during cleaning.

Water Blasting is a cleaning service that uses high-pressure water jets to remove dirt, rust, and coatings from surfaces. It involves setting the right pressure and angle, moving the nozzle steadily, and rinsing to reveal a clean, prepared surface.

Wood Log stain removal is a service that cleans and lifts stains from wood surfaces, using cleaners and sometimes gentle sanding to restore color and even tone without damaging the wood. It involves assessment, application, and final protection or finish recommendations.

Boat Blasting and Vehicle is a service that uses powerful cleaning methods to remove dirt, paint, or grime from boats and vehicles, typically with water jets or abrasive blasting, involving safety gear and controlled environmental practices.

Dry ice blasting non abrasive is a cleaning method that uses frozen CO2 pellets propelled at surfaces to lift away dirt without scratching; the ice immediately sublimates to gas, leaving no residue and requiring minimal cleanup after blasting.

Dustless blasting is a cleaning method that uses a high-pressure stream of recycled media (like glass or mineral grit) with water to remove coatings, rust, and paint. It lightly etches the surface and minimizes dust, reducing cleanup and prep for repainting.

Fire damage wood and mold removal is a service that cleans up burned wood and moisture-related mold after a fire. It involves assessing damage, removing charred materials, drying the area, treating mold, and restoring or replacing affected wood and surfaces.

Food equipment cleaning is the process of washing and sanitizing kitchen tools, appliances, and surfaces used to prepare, cook, or store food. It involves removing dirt, grease, and bacteria with washing, rinsing, sanitizing, and drying to ensure safe food handling.

Mobile powder coating is a service where coating is applied to metal surfaces on-site using dry powder sprayed and cured with heat, typically at the customer’s location, providing durable, smooth finishes without traditional liquid paints.

Mobile sandblasting is a on-site cleaning method that blasts fine abrasive material at surfaces to remove paint, rust, or grime. A trained technician brings portable equipment to your location, preparing, treating, and sometimes refinishing surfaces right there.

Thermoplastic coating is a plastic layer that melts when heated and hardens when cooled, forming a protective, durable finish. It involves applying a molten polymer, then cooling to create a smooth, flexible, and resistant surface on parts or objects.

Wood or concrete blasting is a cleaning and surface preparation method that uses high-pressure abrasive blasts to remove old paint, coatings, dirt, or debris from wood or concrete surfaces, preparing them for finishing or repair.