Core Value Duct Cleaning & Restoration

A/C system maintenance is routine checks and care for your air conditioning unit to keep it cooling efficiently. It involves cleaning filters and coils, inspecting refrigerant levels, checking for leaks, testing performance, and addressing any worn parts.

Aeroseal is a duct sealing technology that improves the efficiency of heating & cooling equipment. It’s made up of polymers, that bind together and seals leaks, holes or misalignments in your ductwork. It uses synthetic nanoparticles, which fit together to make your ducts as airtight as possible.

Air Conditioner: a device and system that cools and dehumidifies indoor air, regulates temperature, and circulates air using a compressor, refrigerant, and vents—installing, inspecting, repairing, or servicing units as needed.

An air conditioning unit cools indoor air by removing heat and humidity, using components like a compressor, refrigerant, and coils. It involves installation, operation, regular maintenance, and filter cleaning to keep rooms comfortable and energy-efficient.

Air Duct Cleaning involves removing dust, dirt, and debris from the ducts in your heating and cooling system, then cleaning or sanitizing the ducts and system components to improve airflow, indoor air quality, and overall system efficiency.

Air Flow is a service that optimizes and monitors ventilation and air movement to keep indoor spaces comfortable and healthy, including assessing airflow, removing stale air, reducing odors, and improving efficiency through fans, ducts, and controls.

Air Flow Measurements is a service that checks how much air moves through a space or system, using tools to measure flow rate, velocity, and pressure. It helps ensure efficient ventilation, comfort, and safety in buildings or equipment.

Air Purification Systems are devices and services that improve indoor air quality by removing dust, pollutants, and odors using filters, filtration, or purification technologies; they install, maintain, and monitor systems to keep air clean.

Air Scrubber Plus by Aerus is a revolutionary new system designed to help eliminate indoor air quality risks by reducing air pollutants, VOCs (chemical odors), cigarette smoke, dust, pollen, mold, odor-causing bacteria, and odors caused by pets and cooking.

Air System Maintenance is a service that checks, cleans, and tunes the air systems in buildings or equipment to ensure clean air flow, proper pressure, and efficient operation, including filter changes, leak checks, and performance testing.

Airflow Measurement is a service that assesses how air moves through spaces or systems, using sensors and tools to measure speed, volume, and direction, then analyzes the data to optimize ventilation, energy use, and air quality.

Allergen Reduction is a service that identifies common triggers like dust, pollen, and pet dander in your home or space, then uses cleaning, filtration, and ventilation steps to reduce these allergens and improve air quality and comfort.

Asbestos is a mineral used in building materials for insulation and fire resistance. It can be hazardous when fibers are released, so the service involves safe assessment, removal, containment, and cleanup by trained professionals to protect health and the environment.

Bathroom Exhaust Fans remove excess moisture, odors, and heat from a bathroom by pulling air out and venting it outside, helping prevent mold. The service includes selection, installation or replacement, wiring, ducting, and testing to ensure proper operation.

Carpet Cleaner is a cleaning service that removes dirt, stains, and odors from carpets using vacuuming, deep cleaning equipment, and safe cleaning solutions to refresh and extend carpet life.

Coil Cleaning is a service that removes dust, grime, and buildup from your HVAC or appliance coils to improve efficiency and airflow. It involves carefully cleaning outdoor and indoor coils, checking for damage, and restoring cooling performance.

Commercial is a service focused on business activities like selling goods or services, advertising, and managing customer relationships. It involves creating or promoting products, handling transactions, and supporting growth through market-facing efforts.

Condenser Coil is a service that inspects, cleans, or replaces the outdoor heat exchange coil on an air conditioner or heat pump to improve efficiency and prevent refrigerant leaks, often including leak checks and system performance notes.

Cooling Equipment is the service of choosing, installing, and maintaining devices that lower and regulate temperature, such as air conditioners, chillers, and refrigeration units, ensuring efficient operation, energy use, and reliable performance.

Disinfectant Treatments is a cleaning service that uses approved disinfectants to kill germs on surfaces, reducing dirt and bacteria. It typically involves preparing the area, applying a sanitizer, waiting for it to work, and wiping or allowing it to air dry for protection.

Dryer Vent Cleaning is removing lint and debris from the dryer vent to improve safety and efficiency. It involves inspecting the vent, cleaning the ductwork, checking for blockages, and ensuring proper airflow and vent termination.

Dryers Exhaust is the system that vents hot, moist air from clothes dryers to the outdoors, removing lint and heat. It involves ducts, vent caps, and proper spacing to prevent fires, moisture buildup, and backdrafts, ensuring safe, efficient operation.

Duct Armor is a service that protects heating and cooling ducts from damage and leaks by inspecting, sealing, insulation, and sometimes repairing or replacing ductwork to improve airflow and energy efficiency.

Duct Inspections involve checking your home or building’s air ducts for leaks, blockages, and damage, using cameras and basic tools. It confirms airflow, improves efficiency, and guides repairs or cleanouts to ensure clean, safe, and efficient ventilation.

Duct Insulation is the process of insulating the pipes or ducts that carry heating or cooling air to keep it at the right temperature, reduce energy loss, and prevent sweating. It involves measuring, selecting the right material, and installing it securely around ducts.

Duct Leakage measures and identifies air leaks in heating and cooling ducts, assessing how much conditioned air escapes or is drawn in. It involves tests, diagnostics, and recommendations to seal leaks and improve efficiency and comfort.

Duct Lining is the process of repairing and sealing damp or damaged ducts by applying a protective lining inside the pipework, improving airflow, reducing leaks, and preventing contamination; it involves cleaning, inspecting, and installing the lining material.

Duct Sealing is the process of fixing leaks in home air ducts so air doesn’t escape. Technicians locate gaps in ducts and seal them with approved materials to improve heating and cooling efficiency and reduce energy waste.

Duct Sealing Aeroseal is a home service that uses a computer-controlled machine to seal leaks inside your ductwork from the inside, improving airflow, energy efficiency, and comfort without invasive拆duct cutting.

Duct System is a service that designs, installs, and maintains the network of air ducts in buildings to move heating, cooling, and fresh air efficiently, including planning layouts, fitting ducts, testing airflow, and sealing for quality and energy savings.

Emergency Response is a service that quickly helps during crises by assessing the situation, coordinating trained responders, and delivering essential support like medical aid, alerts, and safety measures to protect people and property until normal operations resume.

Energy Efficiency helps you save energy and reduce costs by optimizing how you use electricity, heating, and appliances. It involves audits, improved equipment, better insulation, smart controls, and tips to lower consumption and environmental impact.

An Evaporator Coil is part of an air conditioner or fridge that absorbs heat from inside by liquid refrigerant turning into gas, cooling the air. It involves coils, refrigerant flow, and fan-assisted heat transfer to remove warmth from interior spaces.

Facility Maintenance is a service that keeps buildings clean, safe, and functioning. It involves routine upkeep like cleaning, repairs, HVAC and electrical checks, plumbing, safety inspections, and preventive maintenance to prevent problems and extend the facility’s life.

Fiberglass Ductboard is a lightweight, insulating panel used to build and line air ducts. It reduces heat loss or gain, resists moisture, and is cut and attached with adhesives or fasteners to create HVAC ductwork and improve efficiency.

Fire Damage is a service that assesses and repairs damage caused by fire, smoke, and soot. It involves inspection, safety cleanup, deodorizing, structural and content restoration, and guidance on prevention and insurance restoration options.

Fire damage cleanup & repair is a service that restores a home or building after a fire. It involves safety checks, removing smoke and soot, cleaning and replacing damaged materials, odor removal, and repairing structural and cosmetic damage to return spaces to safe, usable condition.

HVAC Cleaning is a service that cleans and removes dust, mold, and debris from heating, ventilation, and air conditioning systems to improve indoor air quality and system efficiency. It typically includes cleaning ducts, coils, fans, and filters.

Residential Air Duct Cleaning - Lite Commercial Air Duct Cleaning - Dyer Vent Cleaning - Exhaust Cleaning - Coil & Blower Cleaning - Disinfect

HVAC duct & vent installation involves setting up or replacing the air ducts and vents that move heated or cooled air through a building, including planning routes, fitting ducts, securing seals, and testing airflow for efficiency and safety.

Conventional Ductwork Repair and Replacement. Advanced Duct Sealing and Duct Lining, Powered by Duct Armor and Aeroseal.

HVAC system maintenance is a service that checks and tunes your heating, ventilation, and air conditioning to keep them efficient and reliable. It includes cleaning filters, inspecting parts, testing energy use, and fixing issues before problems occur.

Heat Transfer is the study of how thermal energy moves between objects or substances through conduction, convection, and radiation, including practical examples, calculations, and methods to design and compare systems that manage heat.

Heating system maintenance is a service that checks and tunes your furnace or boiler to keep it safe, efficient, and reliable. It usually includes cleaning parts, testing performance, inspecting for wear or leaks, and fixing small issues or replacing worn components.

Home renovations are improvements to a house, like updating kitchens or bathrooms, painting, fixing floors, or adding rooms. It involves planning, budgeting, hiring tradespeople, and completing tasks to modernize or enhance comfort and value.

Indoor Air Quality is about keeping the air inside buildings clean and healthy by reducing pollutants, allergens, and moisture. It involves monitoring air, improving ventilation, filtering, and managing sources of pollution to protect occupants’ health and comfort.

Industrial is a service focused on manufacturing and operations, helping design, manage, and improve factories, equipment, workflows, and quality control to produce goods efficiently and safely.

Lint Alert is a code quality service that scans your projects for errors, style issues, and potential bugs, then reports findings so you can fix them quickly and keep your code clean and reliable.

Mold is a service that cleans, tests, and improves air quality by removing moisture-loving fungi and spores from homes or buildings, preventing damage and health issues. It involves inspection, remediation, containment, and sometimes prevention tips.

Mold damage restoration is a service that removes mold growth after water or moisture problems, cleans affected areas, fixes water leaks, dries and sanitizes surfaces, and restores the home to a safe, dry condition to prevent health issues and future damage.

New Furnace is a service that replaces or installs a new heating furnace in a home, including selecting the right unit, removing old equipment, installing wiring and venting, and testing for safe, efficient operation.

Pressure washing uses a powerful water spray to clean dirt, mold, and grime from surfaces like driveways, siding, and decks. It involves a machine with a hose and nozzle, sometimes detergents, and careful technique to avoid damage.

Regular Maintenance is a scheduled service that keeps a system running smoothly by checking, updating, cleaning, and testing essential parts to prevent issues and extend performance and reliability.

Residential refers to services aimed at homes and living spaces, including housing design, construction, maintenance, and repairs for households. It covers living accommodations, safety, comfort, and energy efficiency for residents.

Restoration is a service that repairs and revives damaged items, buildings, or environments, returning them to a safe, functional, and like-new condition through cleaning, fixing, replacing parts, and sometimes preserving original materials.

Restoration Service helps recover and repair damaged items, buildings, or ecosystems. It involves assessment, planning, and work to restore function, appearance, or health—such as cleaning, repairing, stabilizing, and preserving the original condition where possible.

Slab Ductwork is a concrete floor feature that includes embedded ducts or channels for plumbing, electrical, or HVAC runs. It involves planning, pouring a reinforced slab with cavities, and installing insulated ducts or pipes within the slab for hidden, protected services.

Smoke Damage is a service that assesses and repairs damage caused by fire smoke. It includes cleaning soot, removing odors, sanitizing affected areas, and restoring walls, ceilings, and belongings to safe, livable condition.

Transite is a service that helps you move between tasks, projects, or places smoothly by coordinating timing, resources, and communications so work flows without delays or confusion.

Visually Inspect is a service where trained staff carefully look at a product or area with their eyes to identify defects, issues, or quality concerns, documenting findings and noting any necessary fixes or improvements.

Water Damage is a service that fixes leaks, floods, or excess moisture in homes or buildings. It involves assessing damage, drying out areas, removing standing water, cleaning and sanitizing, and repairing affected walls, floors, and structures to prevent mold.

Water damage-related cleanup and repair is a service that removes water, dries surfaces, and fixes damaged areas after floods or leaks, including drying, sanitizing, mold prevention, and restoring flooring, walls, and structural components to their original condition.

Whole Home Purification is a service that cleans the air and water throughout your house. It uses sensors and filters to remove dust, allergens, odors, and contaminants from vents and water lines, improving indoor air quality and overall comfort.