Integrity Residential Maintenance LLC

A/C system repair fixes problems in your vehicle’s air conditioning, such as leaks, compressor or refrigerant issues, and electrical faults. It involves diagnosing the fault, repairing or replacing faulty parts, recharging refrigerant, and testing the system to ensure cold air flows again.

Drain cleaning is a service that removes clogs and buildup from pipes to restore smooth water flow. It involves inspecting the drain, using tools like plungers or pursues, snaking or flushing with water, and fixing any minor leaks or odors.

Ductless heating & A/C services install, repair, and maintain compact, wall-mounted heating and cooling systems that don’t require ducts, providing efficient climate control, indoor comfort, and energy savings for homes or small businesses.

Electrical outlet & switch installation is a service that adds or replaces power outlets and light switches in rooms, wiring them to your electrical system, testing for safety, and ensuring proper placement, coverage, and code compliance.

Electrical outlet & switch repair fixes faulty outlets and switches so devices can be plugged in safely and operate correctly. It involves diagnosing issues, replacing worn parts, wiring checks, and testing for proper voltage and safety.

Electrical panel repair fixes issues in the main service box that distributes power to your home, including replacing breakers, tightening connections, and testing safety to prevent outages and fire risks.

An emergency service is a rapid-response support system that helps people in urgent danger or health crises by coordinating police, fire, medical, or rescue teams to provide immediate assistance and safety.

Fan installation is the process of mounting a ceiling or wall fan, wiring it safely to a power source, and ensuring it spins correctly. It involves mounting hardware, electrical connections, balancing blades, and testing for safe operation.

Fan repair is fixing a broken fan so it works again. It involves diagnosing issues like noisy bearings, wobbling blades, weak airflow, or electrical problems, then replacing parts, lubricating moving bits, and testing performance to ensure safe, smooth operation.

A faucet installation is the process of fitting a new kitchen or bathroom faucet to a sink or countertop. It involves removing the old faucet, choosing the right model, connecting water lines, sealing with putty or tape, and testing for leaks.

Faucet repair is fixing a dripping, leaking, or faulty faucet so it stops wasting water and works smoothly again. It involves inspecting parts like gaskets, seals, cartridges, handles, and valves, tightening or replacing worn components, and testing for leaks.

Flood cleanup is a service that removes water, mud, and damaged materials after flooding; it includes drying, sanitizing, deodorizing, and restoring rooms to safe, livable condition while preventing mold growth.

Garbage disposal installation is setting up a machine under your kitchen sink that grinds food waste so it goes away through the drain. It involves choosing a unit, mounting it, wiring, plumbing, and testing for safe, quiet operation.

Garbage disposal repair is fixing the under-sink unit that grinds food waste. It involves diagnosing jams or failures, repairing or replacing components, restoring power and safe operation, and ensuring leaks or unusual noises are addressed.

HVAC duct & vent installation is the process of adding or replacing the pipes (ductwork) and vents that carry heated or cooled air through a building, including planning layout, fitting components, sealing joints, and ensuring proper airflow and efficiency.

HVAC duct & vent repair fixes leaks, holes, or blockages in the air ducts and vents that move heated or cooled air through a building, restoring proper airflow, efficiency, and indoor comfort.

HVAC system maintenance is routine care for your heating, ventilation, and air conditioning system to keep it running efficiently. It includes cleaning filters, inspecting components, checking refrigerant and electrical connections, and addressing any worn parts before problems arise.

HVAC system repair fixes heating, cooling, and ventilation equipment to restore proper temperatures and air quality. It involves diagnosing issues, replacing or repairing parts, refrigerant handling, and testing performance to ensure reliable operation.

Heating system installation is the process of selecting, fitting, and starting a new home heater or boiler so it safely provides warm air or water. It involves planning, sizing, ventilation, connections to fuel and power, testing, and ensuring efficient operation.

Heating system maintenance is a routine check and care for your furnace or boiler to keep it safe, efficient, and reliable. It involves inspecting components, cleaning or replacing filters, testing performance, checking for leaks, and correcting any issues.

Heating system repair is fixing furnaces, boilers, or heat pumps to restore warmth. It involves diagnosing problems, replacing faulty parts, cleaning, testing safety controls, and ensuring efficient, reliable operation of your home heating.

Install AC is a service that sets up a new air conditioning unit in your space, including selecting the right size, mounting the outdoor and indoor components, connecting electrical wiring, testing cooling performance, and ensuring safe, efficient operation.

Install thermostat is a service that fits or replaces a thermostat in your home to control heating and cooling. It involves choosing a suitable model, wiring or connecting it to your system, configuring settings, and testing for proper operation.

Installation is the process of setting up a product or service so it’s ready to use. It involves preparing tools, placing and configuring components, aligning settings, and testing to ensure everything works correctly.

Light fixture installation is the service of wiring and mounting ceiling or wall lights, including removing old fixtures, connecting wiring, attaching the new fixture securely, and testing for proper operation and safety.

Light fixture repair is fixing or replacing parts of ceiling or wall lights so they work safely, such as wiring, bulbs, sockets, switches, or mounting hardware, and ensuring proper electrical connections and secure installation.

Mold remediation is the process of removing mold from homes to improve air quality and prevent damage. It involves detecting growth, containing the area, cleaning affected surfaces, fixing moisture problems, and preventing future mold return.

No Heat is a service that provides extra comfort by placing a special insert under you to stay warm without using a hot heater or direct heat, helping you relax and feel cozy in mild, controlled warmth.

Outdoor lighting installation is the service of setting up outdoor lights to illuminate exterior spaces. It involves planning, selecting fixtures, wiring, weatherproofing, testing, and ensuring energy efficiency and safety for yards, paths, stairs, and gardens.

Plumbing is the service of installing, fixing, and maintaining pipes, drains, and fixtures that bring clean water in and waste water out of buildings. It covers repairs, upgrades, leaks, inspections, and ensuring safe, working water systems.

Plumbing leak detection is a service that finds hidden water leaks in your pipes using specialized tools, tests for moisture, and checks for damp spots. It involves locating leaks, assessing damage risk, and recommending repair or monitoring plans.

Plumbing pipe repair fixes leaks, bursts, or blockages in home or commercial pipes. It involves locating the problem, replacing or sealing damaged sections, testing for leaks, and ensuring proper water flow and safety.

Repair HVAC is a service that fixes heating, ventilation, and air conditioning systems. It involves diagnosing issues, replacing faulty parts, repairing leaks, and restoring proper temperature, airflow, and efficiency in homes or buildings.

Sewage cleanup is the process of cleaning up and disinfecting areas contaminated by sewage leaks or spills. It involves safety gear, waste removal, water extraction, cleaning and sanitizing surfaces, and proper disposal to prevent health risks.

Sewer cleaning is the process of clearing out blockages and buildup in sewer pipes to keep wastewater flowing smoothly. It involves inspecting pipes, removing debris, and flushing out clogs using specialized tools and equipment.

Sewer repair fixes damaged or leaking sewer lines to restore proper waste flow and prevent backups. It involves diagnosing the issue, removing blockages or cracks, replacing pipes or joints, and testing the system for leaks and proper function.

Shower installation is the process of fitting a new shower system in a bathroom, including mounting the shower unit, connecting water supply lines, installing a tray and enclosure, and sealing to prevent leaks, ensuring safe, functional use.

Shower repair is fixing leaks, clogs, or broken parts in a shower, such as taps, shower heads, valves, or doors. It involves diagnosing issues, replacing worn components, resealing, and ensuring the shower works safely and smoothly.

Sump pump repair is fixing the pump that removes excess water from basements, including troubleshooting power or switch failures, motor problems, clogs, or leaks, and restoring proper function to prevent flooding.

Thermostat installation is the process of fitting a device that controls your heating or cooling system, replacing or upgrading an old unit, wiring it correctly, configuring temperature settings, and testing to ensure accurate climate control.

Thermostat repair is fixing the device that controls your heating and cooling. It involves diagnosing why it won’t regulate temperature, testing connections, replacing faulty sensors or the thermostat itself, and ensuring the system runs efficiently.

Toilet installation is fitting a new toilet to replace an old one or set up a new bathroom fixture. It involves removing the old unit, preparing the floor and waste pipes, connecting water supply lines, sealing joints, and testing for leaks.

Toilet repair is fixing issues with a toilet, such as leaks, running water, clogs, or weak flushing. It involves diagnosing problems, replacing worn parts like flappers or seals, adjusting fills, and ensuring safe, quiet, and efficient operation.

Water damage-related cleanup & repair is a service that removes standing water, dries and sanitizes affected areas, and fixes structural and cosmetic damage to restore safety and usability after leaks, floods, or spills.

Water damage-related mold removal is a service that cleans up mold growth caused by water leaks or flooding. It involves inspecting for moisture, safely removing contaminated materials, drying the area, treating mold, and preventing future growth with restoration and prevention steps.

Water heater installation is the process of setting up a new water heater for hot water at your home, including choosing the right unit, mounting or placing it, connecting gas or electricity and plumbing, and testing to ensure safe, reliable hot water supply.

Water heater repair fixes problems with your hot water heater so it heats water properly again. It involves diagnosing issues, replacing faulty parts like thermostats or heating elements, and ensuring safe operation and proper temperature.

Water removal is the process of taking out excess water from a space or material, often after flooding or spills. It involves pumping or extracting water, drying the area, and using tools to prevent damage and mold, restoring the space to normal conditions.