Mister Water Heater

24/7 emergency plumbing services provide round-the-clock help for urgent plumbing problems like leaks, clogs, or burst pipes, with rapid response, fixes on site, and temporary solutions until permanent repairs can be completed.

Bathtub Installation is the process of putting in a new bathtub, connecting plumbing and drainage, securing it in place, sealing edges to prevent leaks, and ensuring the fixture fits the bathroom layout and looks right.

Drain cleaning is a service that clears clogs and buildup from pipes to restore proper water flow in sinks, showers, or drains. It typically uses tools or chemicals to remove blockages and may involve inspecting with cameras or snaking the pipes.

Emergency water heater installation is a quick service to replace or install a water heater when it’s broken or failing. Technicians assess the issue, bring a suitable unit, and install, test, and ensure safe operation so hot water is restored fast.

Emergency water heater repair is fast service to diagnose and fix a broken water heater so you get hot water again. Technicians inspect issues, supply parts if possible, and perform urgent repairs or safe temporary solutions, usually around the same day.

Emergency water heater replacement is a rapid service to install a new water heater when your current unit fails, leaks, or poses safety issues. A technician diagnoses the problem, removes the old unit, installs a new heater, tests it, and ensures safe operation.

Emergency water heater service is a fast, on‑site repair or replacement of a broken water heater to restore hot water quickly. Technicians diagnose failures, fix or replace parts, and ensure safety and proper function to minimize downtime.

Faucet installation is the process of putting a new faucet onto a sink or countertop, including removing the old one, sealing the joints, connecting water lines, and testing for leaks to ensure proper water flow and fit.

Faucet repair is fixing leaking or malfunctioning taps. It involves diagnosing issues like worn seals, faulty cartridges, or worn washers, replacing parts, and testing to ensure a smooth, drip-free faucet operation.

Garbage disposal installation is adding a kitchen appliance that grinds food waste in your sink. It involves mounting the unit under the sink, connecting it to power and the drainpipe, and ensuring proper electrical and plumbing fit and safety checks.

Garbage disposal repair fixes jams, leaks, strange noises, or failure to run in a kitchen sink. Technicians diagnose the motor, check electrical connections, inspect the unit, replace faulty parts, and ensure it runs safely and smoothly again.

Pipe repair and replacement is fixing leaks, cracks, or damaged pipes and, if needed, replacing sections or whole pipes to restore proper water flow and prevent future problems in homes or buildings.

Plumbing leak detection is a service that finds hidden water leaks in pipes, fixtures, and systems using specialized equipment. It involves locating the source, assessing damage, and advising on fixes to prevent wasted water and costly repairs.

Plumbing leak repair is fixing drips or bursts in pipes, faucets, or fixtures. It involves locating the leak, shutting off water, replacing or sealing damaged parts, testing for leaks, and ensuring the system is dry and safe to use again.

Plumbing pipe repair fixes leaks, cracks, or breaks in water or sewer pipes. It involves locating the problem, shutting off water, removing damaged sections, replacing or patching them, and testing the system to prevent future leaks.

Shower installation is fitting a new shower or replacing an old one, including setting up pipes, choosing a shower unit, attaching the enclosure or doors, installing controls, and sealing to prevent leaks so you can have a functional, safe shower space.

Sump pump installation is setting up a pump in a basement or low area to remove accumulating water and prevent floods. It involves selecting a pump, installing a basin, hooking up power and discharge lines, and testing for proper drainage.

Sump pump repair fixes or replaces a basement pump that removes water. It involves diagnosing why the pump isn’t working, checking power, wiring, float switch, seals, and drainage, and restoring proper operation to prevent flooding.

Toilet installation is the process of replacing or setting up a toilet, including removing the old unit, preparing the plumbing and floor, and installing the new toilet with seals, bolts, and connections to water and waste lines.

Water heater installation is the service of putting a new water heater in your home, connecting it to power, gas, or plumbing, and setting it up for safe, efficient hot water along with testing for leaks and proper operation.

Water heater repair is fixing problems with your home’s hot water heater so it heats water properly. It involves diagnosing issues, replacing faulty parts like thermostats or elements, and ensuring safe operation and proper temperature control.

Water tank installation is the process of placing and connecting a storage tank to your water system so it collects, stores, and supplies water; it involves selecting the tank, mounting it securely, attaching inlets/outlets, and testing for leaks and proper pressure.

Water tank repair is fixing leaks, cracks, or faulty parts in residential or commercial water tanks to restore proper storage and safe water flow. It involves diagnosing issues, replacing damaged components, resealing joints, and testing for leaks and pressure.

Bathtub repair and replacement is fixing a damaged tub or swapping it out for a new one. It involves inspecting wear, leaks, or cracks, then patching, resurfacing, replacing fittings, and sometimes removing and installing a new tub to restore safe, functional bathroom use.

Electric water heater installation is the process of placing and connecting an electric-powered tank or tankless heater to supply hot water. It involves sizing, mounting, wiring, piping, venting if needed, and testing for safe, reliable hot water delivery.

Energy efficient water heater installation is replacing or upgrading a heater to a model that uses less energy, saving money. It involves selecting a compliant unit, proper sizing, code-safe placement, efficient wiring/plumbing, and ensuring performance and safety checks.

Gas water heater installation is the process of setting up a gas-powered unit that heats water for your home, including selecting a suitable unit, connecting it to the gas supply and venting, mounting, and testing for safe operation and good hot-water performance.

Mold remediation is cleaning up and removing mold from buildings, fixing moisture problems, and preventing future growth. It involves assessment, containment, cleaning affected surfaces, and repairing leaks or moisture sources to restore safe indoor air.

Tankless water heater installation is installing a compact unit that heats water on demand as you use it, rather than storing hot water. It involves selecting a suitable unit, mounting it, connecting gas or electricity and venting, and ensuring proper pressure and safety checks.

Water damage restoration is a service that repairs homes after flooding or leaks. It involves assessing damage, removing excess water, drying and dehumidifying, cleaning and sanitizing, and fixing structural and cosmetic damage to restore safety and appearance.

Water softener maintenance and repair is a service that checks and keeps your system clean, recalibrates settings, replaces worn parts, resolves common issues, and fixes or restores soft water flow for smoother, safer, and more efficient home use.

A water softener replacement is swapping an old water softener for a new unit to remove minerals like calcium and magnesium from your water, improve taste and feel, and protect plumbing. It involves disconnecting the old unit, installing the new one, and testing the system.