Roto-Rooter Plumbing, Drain, & Water Damage Cleanup Service

Drain cleaning is removing blockages and buildup from sinks, showers, or pipes to restore smooth water flow. It involves inspecting the drain, using tools or enzymes to clear clogs, and flushing the line to prevent future problems.

Faucet installation is the process of putting a new faucet onto a sink or vanity, including removing the old faucet, fitting mounting hardware, sealing with plumber’s putty or sealant, and connecting water supply lines so it works without leaks.

Faucet repair is fixing a leaky or faulty faucet, including tightening parts, replacing worn washers, cartridges, or seals, and ensuring smooth operation and proper water flow without leaks.

Flood cleanup is a service that removes water, dries and sanitizes affected areas, and repairs damage after flooding. It involves pumping out water, drying with equipment, cleaning, sanitizing to prevent mold, and restoring walls, floors, and belongings.

Flood restoration is the process of cleaning up water damage after floods, drying out rooms, removing damaged materials, treating mold and odors, and restoring the home to its normal state with repairs and safeguards to prevent future damage.

Garbage disposal installation is the process of fitting a device under a kitchen sink that grinds food waste so drains stay clear. It involves choosing a unit, wiring, connecting to the sink and power, and testing for safe operation.

Garbage disposal repair fixes a worn or jammed kitchen food waste grinder, restoring grinding, safety interlocks, and steady operation. It involves diagnosing jams or motor issues, clearing blockages, replacing faulty parts, and testing for proper function.

High pressure water jetting uses a powerful, focused stream of water to cut, clear, or clean surfaces and pipes. It removes grease, rust, blockages, and debris by blasting water at very high pressure, sometimes with additives, to reach tight or stubborn areas.

Mold cleaning is removing mold growth from surfaces to improve air quality and prevent damage. It involves inspecting areas, safely containing spores, scrubbing or washing affected surfaces, sometimes replacing warped materials, and ensuring moisture control.

Mold damage restoration is cleaning up and fixing areas affected by mold after water damage. It involves inspecting for mold, removing contaminated materials, cleaning and sanitizing, drying structures, and applying treatments to prevent future growth.

Mold mitigation is removing mold growth from water-damaged areas and preventing it from returning. It involves finding and fixing moisture sources, cleaning or removing moldy materials, and treating surfaces to inhibit future growth.

Mold remediation is cleaning and removing mold growth from indoors, stopping water leaks, and fixing moisture problems to prevent future growth, including cleaning affected surfaces, replacing damaged materials, and improving ventilation.

Outdoor plumbing system repair fixes pipes, drains, sprinklers, and water lines outside your home. It involves locating leaks or blockages, repairing or replacing damaged pipes, valves, and irrigation components, and ensuring proper drainage and function.

Plumbing Service

Plumbing leak detection is a service that finds hidden water leaks in pipes, walls, or floors using special tools. It involves listening for sounds, pressure checks, and moisture measurements to pinpoint leaks and prevent water damage.

Plumbing leak repair is fixing water leaks in pipes, taps, or fixtures. It involves finding the leak, shutting off water, repairing or replacing damaged pipes or seals, testing for leaks, and ensuring the system is dry and secure.

Plumbing pipe repair fixes leaks, cracks, or bursts in pipes, stops water damage, and restores proper water flow. It involves locating the problem, replacing or patching damaged pipes, testing for leaks, and ensuring safe, reliable operation.

Sewage cleanup is the removal and cleaning of waste water and solid waste from floors, pipes, or areas contaminated by sewage. It involves safety precautions, extraction, disinfection, deodorizing, and proper disposal to prevent health risks.

Sewer cleaning is the process of clearing clogs and buildup from underground sewer pipes to ensure smooth wastewater flow. It involves inspecting, removing blockages, flushing pipes, and sometimes cleaning with specialized machines or tools to prevent backups and odors.

Sewer repair fixes leaks, cracks, or blockages in sewer lines to restore proper drainage. It involves locating the problem, removing damaged sections if needed, replacing pipes, and testing the system to prevent future issues.

Shower installation is the service of fitting or replacing a shower, including the shower base or tray, enclosure, faucet or mixer, and any plumbing or electrical work needed to make it function safely and look good in your bathroom.

Shower repair is fixing problems with a shower, like leaks, low water pressure, drips, or broken knobs. It involves diagnosing the issue, replacing worn parts, resealing, and ensuring proper water flow and safety so the shower works like new.

Sump pump installation installs a drain and pump in a basement or low area to remove excess water. It involves wiring, piping to discharge outdoors, and sealing to prevent leaks, protecting floors from flooding.

Sump pump repair fixes a malfunctioning basement pump that removes water. It involves diagnosing why the pump or switch isn’t working, replacing faulty parts, checking electrical connections, and testing the system to ensure reliable water removal.

Toilet installation is the process of putting in a new toilet, connecting it to water and waste pipes, securing it to the floor, and testing it to ensure it doesn’t leak or run. It may involve removing the old toilet and adjusting the plumbing as needed.

Toilet repair is fixing common leaks, clogs, running toilets, or faulty flush mechanisms. It involves diagnosing issues, replacing faulty parts (valves, flappers, seals), adjusting water level, and ensuring safe, efficient flushing and drainage.

Video Camera Inspections involve using a small camera on a flexible rod to inspect hard-to-see spaces like pipes or walls, sending live video to a monitor to detect blockages, damage, or leaks, often with a report of findings and recommended fixes.

Water Damage Service

Water Treatment Systems Service

Water damage-related cleanup & repair is a service that finds and removes water, dries and sanitizes affected areas, and fixes damaged structure and belongings to restore safety and normal use after floods, leaks, or spills.

Water damage-related mold removal is a service to clean up mold growth caused by water leaks or floods. It involves stopping the water, drying surfaces, removing moldy materials, disinfecting, and preventing future mold with moisture control and repairs.

Water heater installation is the process of putting in a new unit that heats your home’s hot water. It involves selecting a suitable heater, shutting off power or gas, removing the old unit, installing connections and venting, and testing for safe operation.

Water heater repair is fixing problems with your home's heater so it heats water again. It involves diagnosing issues, replacing faulty parts like thermostats or valves, and testing the unit to ensure safe, reliable hot water delivery.

Water removal is the process of taking excess water out of a space or object, usually after flooding or spills. It involves extracting water with pumps or pumps and drying the area with fans or dehumidifiers to prevent damage and mold.

Water tank installation is the process of setting up a water storage tank for homes or businesses, including choosing the right size, connecting pipes, securing the tank, and ensuring proper filtration and drainage for reliable water supply.

Water tank repair is fixing leaks, cracks, or faulty components in residential or commercial water storage tanks to restore safe, clean water flow. It may involve sealing, part replacement, pressure tests, and ensuring proper connections and insulation.