Creative MultiCare

Area rug cleaning is a service that professionally washes and refreshes large floor rugs, removing dirt, stains, and odors. It involves vacuuming, spot treating, deep cleaning, drying, and returning the rug to a clean, refreshed state.

Carpet cleaning is a service that removes dirt, stains, and smells from carpets using vacuuming, washing, or steam cleaning, plus sometimes deodorizing and stain treatment to refresh and extend the carpet’s life.

Carpet steam cleaning uses hot water and detergent sprayed into the carpet, then extracted with a powerful vacuum to lift dirt, remove stains, and refresh fibers, often including pre-treating spots and deodorizing for a cleaner, fresher carpet.

Drain cleaning is a service that removes clogs and buildup from pipes to restore smooth water flow. It involves snaking, using specialized tools, or flushing with water/cleaners to break through blockages and prevent backups in sinks, drains, and toilets.

Drapes & curtain cleaning is a service that cleans fabric window coverings, removing dirt, dust, and stains. It involves inspecting fabrics, choosing safe methods (wet wash or dry clean), treating spots, and carefully drying and returning them to your window.

Faucet installation is fitting a new kitchen or bathroom faucet and connecting it to water lines. It involves removing the old faucet, choosing a compatible model, sealing connections, testing for leaks, and cleaning up after completion.

Faucet repair is fixing a leaking or dripping faucet, replacing worn-out parts like washers, seals, or cartridges, and adjusting valves to stop leaks and restore proper water flow.

Floor Care is a service that cleans and preserves floors, removing dirt, dust, and stains; it may include sweeping, mopping, polishing, sealing, and occasional deep cleaning to keep floors looking clean and protected.

Garbage disposal installation is the process of adding a compact device under a kitchen sink that shreds food waste and connects to the drain, so you can grind leftovers and drain them away with your existing plumbing.

Garbage disposal repair fixes jammed, leaking, or malfunctioning under-sink grinders that process food waste, by inspecting, clearing clogs, replacing motors or seals, and testing for safe, quiet operation.

General carpet cleaning is a service that removes dirt, stains, and odors from carpets using vacuuming, pretreatment, and cleaning methods like steam or dry cleaning to refresh and extend carpet life.

Granite countertop installation is adding durable granite surfaces to kitchens or bathrooms. It involves measuring, cutting, sealing edges, transporting, and securely mounting slabs on existing cabinets, with professional finishing for a smooth, heat-resistant top.

Granite countertop repair fixes chips, cracks, blemishes, or dull spots on granite surfaces. A technician inspects damage, polishes or fills cracks, reseals the surface, and may replace edges to restore a smooth, durable, and like-new finish.

Jetting is a service that uses high-pressure jets of water or steam to clean, unclog, or remove debris from pipes, drains, or machinery. It involves equipment to generate powerful streams, guiding them to the target area, and monitoring results for thorough cleaning.

Kitchen cabinet refacing is a remodel that updates cabinet doors, drawers, and hardware while keeping the existing cabinet boxes. It involves removing old doors, applying new veneer or paint, installing new doors/drawer fronts, and replacing handles for a fresh look with less disruption and cost.

Kitchen cabinet refinishing is renewing the look of cabinet doors and drawers by sanding, staining or painting, and sealing the surface to refresh color, hide wear, and extend the cabinets’ life without full replacement.

Kitchens countertop installation is the process of measuring, cutting, and fitting new counters (like granite, quartz, or laminate) onto your kitchen cabinets, sealing edges, and ensuring a smooth, level surface for cooking, prep, and cleaning.

Kitchen countertop repair is fixing damaged or worn counters to restore a smooth, safe surface. It involves assessing damage, filling cracks, reshaping edges, repairing chips, resurfacing, or replacing worn coatings to restore appearance and function.

Kitchen countertop replacement is swapping old counters for new ones, involving measuring, removing the old surface, prepping the base, and installing new material (like granite, quartz, or laminate) with sealing and finishing for a durable, seamless surface.

Leather cleaning is a service that refreshes and restores leather items by removing dirt, oils, and stains, conditioning the material, and protecting it from drying out so the leather stays soft, supple, and looking its best.

Mattress cleaning is removing dirt, stains, odors, and allergens from a mattress using vacuuming, spot treatment, and sometimes steam or upholstery cleaning to refresh and extend its life.

Mold Remediation is a service that removes mold growth from homes or buildings and fixes moisture problems to prevent it from returning. It includes inspection, containment, cleaning, and addressing leaks or humidity sources.

Mold Treatment is a service that finds and removes mold growth in homes or buildings, cleans affected areas, and uses powders or sprays to prevent future growth, improving air quality and reducing health risks.

Mold cleaning is professional removal of mold growth from surfaces to improve air quality and prevent damage. It involves inspecting for mold, safely containing the area, cleaning with specialized cleaners, and removing affected materials if needed.

Mold damage restoration is cleaning and repairing spaces affected by mold growth after water damage, including removing mold, drying areas, treating with fungicides, cleaning belongings, and restoring walls, flooring, and ventilation to prevent recurrence.

Mold inspection is a service where a professional checks a building for mold, moisture, and hidden growth. It involves visual checks, moisture tests, possibly air samples, and reporting findings with recommendations for cleanup and prevention.

Mold mitigation is the process of stopping mold growth and removing mold from a building. It involves finding moisture sources, sealing off affected areas, cleaning and sanitizing surfaces, and repairing leaks to prevent future growth.

Mold remediation is cleaning and removing mold from your home to improve air quality and prevent damage. It involves finding the moisture source, containment, removing affected materials, cleaning surfaces, and ensuring proper drying and prevention measures.

Outdoor plumbing system repair fixes leaks, breaks, and failures in exterior pipes, sprinklers, faucets, and drainage lines. It involves locating problems, replacing damaged pipes or components, restoring water flow, and ensuring proper outdoor drainage and winter protection.

Pet stain & odor removal is a cleaning service that eliminates pet messes and smells from carpets, rugs, and surfaces using specialized cleaning solutions and techniques to remove stains, odors, and bacterial residue so spaces feel fresh and safe for pets and people.

Plumbing is fixing and installing pipes, fixtures, and fittings to supply water and remove waste in homes or buildings. It involves assessing needs, repairing leaks, unclogging drains, installing toilets, sinks, and water heaters, and ensuring safe, working systems.

Plumbing fixture installation is the service of setting up items like sinks, toilets, faucets, and showers, connecting them to water supply and drainage, securing them, testing for leaks, and ensuring proper function and compliance.

Plumbing leak detection identifies hidden water leaks in pipes, fixtures, and slabs. It uses tools like sensors and listening devices to locate moisture, pressure drops, or unusual water use, then estimates the leak size and suggests repairs to prevent damage.

Plumbing leak repair fixes water leaks in pipes, fixtures, or fittings. It identifies the leak, stops water flow, and repairs or replaces damaged parts to prevent waste, water damage, and high bills, often testing for a proper seal afterward.

Plumbing pipe repair is fixing leaky or damaged pipes to stop water loss and prevent flooding. It involves locating the problem, removing damaged sections, replacing pipes or fittings, testing for leaks, and restoring normal water flow in homes or buildings.

Pool plumbing repair fixes leaks, clogs, and broken pipes in a swimming pool’s water system, including pumps, filters, valves, and drains, to restore proper water flow, pressure, and function so the pool operates safely and efficiently.

Property maintenance is keeping a building in good condition, including routine tasks like cleaning, repairs, lawn care, pest control, and safety checks to prevent problems and ensure the property stays functional and comfortable for occupants.

Remodeling is updating or changing parts of a home, such as rooms or features, to improve layout, style, or functionality. It often involves planning, design, demolition, construction, new fixtures, and finishing touches to fit your needs.

Repair water fixtures fixes leaks, drips, or broken parts like faucets, valves, and showerheads. It involves inspecting, tightening fittings, replacing washers or cartridges, or installing new fixtures to stop leaks and restore proper water flow.

Repairs & maintenance is a service that fixes broken items and keeps things working well. It covers routine upkeep, inspections, replacing worn parts, and tuning or servicing equipment to prevent problems and extend its life.

Restorative Drying is a service that uses controlled, gentle drying to restore damp or damaged materials—rebalancing moisture, preventing mold, and stabilizing surfaces to prevent further damage.

Resurfacing is a cosmetic procedure that smooths and evenes the skin’s surface, typically by removing damaged outer layers or using resurfacing devices. It reduces wrinkles, scars, or sun damage and may involve downtime as the skin heals.

Septic system installation is setting up a private underground tank and drain field to treat wastewater from a home, including site assessment, trenching, tank placement, pipe connections, and soil testing to ensure safe, future use.

Sewage cleanup is professional cleaning and sanitizing of areas contaminated by wastewater, sewage backups, or spills. It involves safety gear, removing waste, drying, disinfecting surfaces, and restoring damaged spaces to prevent health risks.

Sewer and Drain is a service that cleans, unblocks, and maintains underground pipes and drains to prevent backups, odors, and leaks. It involves inspections, camera surveys, descaling, jetting, and repairing or replacing damaged pipes.

Sewer cleaning is the service of clearing blockages and buildup from sewer lines to restore smooth flow. It involves inspecting drains, removing debris, flushing with water or tools, and ensuring pipes are clear and functioning safely.

Sewer repair fixes damaged pipes and joints that carry wastewater from your home or business to the street main. It involves locating leaks or breaks, replacing or sealing sections, and ensuring the system drains properly to prevent leaks and backups.

Shower installation is setting up a new shower system, including attaching a shower tray or base, installing walls or enclosure, fitting a door or curtain, connecting plumbing for water supply and drainage, and testing for leaks to ensure proper function.

Shower repair involves fixing leaks, clogs, low water pressure, broken valves, or faulty controls in a shower. It includes diagnosing the issue, replacing parts, and testing to ensure the shower works safely and reliably.

Sump pump installation is adding a device in your basement or crawl space to remove excess water and prevent flooding. It involves choosing a pump, installing a basin, routing power and discharge lines, and testing the system to ensure it runs automatically when water is detected.

Sump pump repair fixes or replaces a malfunctioning basement pump that moves water away from your home. It involves diagnosing why the pump isn’t working, repairing components like the motor or switch, and ensuring proper drainage to prevent flooding.

Toilet installation is the process of fitting a new or replacement toilet in a bathroom, including removing the old unit, connecting water supply and waste pipes, sealing, testing for leaks, and ensuring it works with the current plumbing.

Toilet repair is fixing common toilet problems like leaks, running water, clogs, or weak flushes. It involves diagnosing the issue, replacing faulty parts (fill valves, flappers, seals), adjusting water level, and ensuring the toilet works smoothly again.

Upholstery cleaning is the process of refreshing fabric on furniture like sofas and chairs. It involves removing dirt, stains, and odors using specialized cleaning methods and products to restore appearance and extend the life of the upholstery.

Water Extraction is a service that retrieves water from a source, processes it for safety, and prepares it for use, involving collection, filtration, testing, and storage to ensure clean, usable water for domestic or industrial needs.

Water damage-related cleanup & repair is a service that removes excess water, dries and sanitizes affected areas, and fixes damaged materials like walls, floors, and ceilings to restore a home or building to safe, functional condition.

Water damage-related mold removal is a service that cleans up mold growth caused by water leaks or flooding, dries the area, removes contaminated materials, and uses protective gear and controls to prevent health risks and prevent mold from returning.

Water heater installation is the process of placing a new water heater in a home, connecting it to power or fuel, and linking plumbing and venting so hot water is supplied safely and reliably. It includes placement, hookups, testing, and safety checks.

Water heater repair is fixing problems with your heater so it properly heats water, dispenses hot water, and runs safely. It involves diagnosing issues, replacing faulty parts, cleaning components, and testing to ensure reliable, safe operation.

Water removal is the process of extracting standing or leaking water from a space or object to prevent damage and mold. It involves assessing the area, extracting excess water with pumps or vacuums, drying surfaces, and monitoring to ensure it’s dry.

Water tank installation is the process of placing and connecting a water storage tank to a building’s plumbing, including mounting, securing, and linking to the water supply and outlets, with basic piping, valves, and testing for leaks.

Water tank repair is fixing leaks, cracks, or malfunctions in residential or commercial storage tanks to restore safe, clean water delivery. It involves diagnosing issues, sealing leaks, replacing damaged parts, testing pressure, and ensuring proper insulation and seals.