Tweedy Plumbing & Restoration

Backflow Prevention Device Testing checks that pipes in your water system don’t allow dirty water to flow back into clean taps. Technicians test the device, ensure it passes safety standards, and replace or calibrate parts if needed.

Carbon Monoxide Detectors Installed is a service that places CO detectors in your home to monitor for dangerous gas levels, typically powered by battery or home wiring, with testing and basic setup to ensure they alert you if CO is present.

Clogged Kitchen Drains is a service that clears blockages in kitchen sinks or drains, often using plungers, augers, or chemical or enzymatic cleaners to restore water flow and prevent backups in kitchen plumbing.

Descaling is the process of removing mineral buildup, like limescale, from appliances (kettles, coffee machines, heaters). It involves applying a descaling solution or acid, letting it react, then rinsing thoroughly to restore efficiency and performance.

Drain cleaning is a service that removes clogs and buildup from sinks, tubs, and pipes using tools and cleaners. It involves inspecting the drain, clearing blockages, and ensuring proper flow to prevent backups and odors.

Drips And Leaks is a simple home maintenance service that checks for water leaks, fixes drips, repairs pipes, and helps prevent future water damage with quick, reliable fixes and safety tips.

Electronic Water Leak Detection is a system that monitors for unexpected water leaks using sensors and alarms, quickly detecting moisture, signaling alerts, and helping prevent damage by notifying you or triggering shut-off valves.

Faucet installation is the process of removing an old faucet and fitting a new one to a sink or basin, including attaching water supply lines, securing the fixture, and testing for leaks to ensure proper water flow and seal.

Faucet repair is fixing leaks, drips, or faulty parts in a sink faucet. It involves diagnosing problems, replacing worn washers, seals, cartridges, or handles, and testing for smooth operation to prevent water waste and ensure proper function.

Flood cleanup is a service that removes water and moisture from homes or buildings after flooding, dries the area, removes damaged materials, disinfects to prevent mold, and restores floors, walls, and other surfaces to prevent further damage.

Flood restoration is the process of cleaning up and repairing a property after flooding. It involves removing water, drying surfaces, disinfecting to prevent mold, cleaning belongings, and repairing damaged walls, floors, and structures to restore the home.

Garbage disposal installation is adding a kitchen appliance that grinds food waste and fits under the sink; it involves mounting the unit, connecting electrical and plumbing lines, and testing for leaks and proper operation.

Garbage disposal repair is fixing the kitchen sink waste disposer when it isn’t grinding, jammed, leaking, making noises, or not turning on. It involves diagnosing the problem, clearing jams, replacing worn parts, and restoring safe, quiet operation.

Gas Leak Detection And Repair is a service that finds and fixes gas leaks to prevent dangerous buildup. It involves testing for leaks, locating faulty connections or appliances, repairing or replacing parts, and confirming the area is safe and sealed.

Gas Line is a service that installs or repairs gas piping for appliances, ensuring safe fuel delivery, proper sizing, leak testing, and compliance with safety codes.

Gas System is a service that checks and maintains the network of pipes, meters, and safety devices that deliver gas to a building, ensuring safe installation, proper pressure, leak detection, and efficient operation.

Home Repairs is a service that fixes common household issues, like plumbing leaks, electrical problems, broken fixtures, and small renovations. It involves diagnosing the problem, sourcing parts, and completing safe, lasting repairs in your home.

Hot Water Circulation Pumps keep hot water ready at taps by continuously circulating heated water through pipes, reducing wait time. The service includes installing, wiring, and testing a pump, piping connections, controls, and routine maintenance to ensure efficient flow.

Hydro jetting is a pipe cleaning method that uses a high-pressure water stream to blast away clogs, debris, and buildup inside drains and sewer lines. It involves a specialized nozzle, a powerful pump, and piping inserted into the line to flush it clean.

Local Plumber Costa Mesa is a local plumbing service that fixes leaks, installs and repairs pipes, drains, water heaters, and other plumbing systems for homes and businesses in Costa Mesa, providing quick, on-site repair and maintenance.

Mold damage restoration is the process of cleaning up and fixing damage caused by mold growth after water leaks or moisture. It includes drying, removing moldy materials, cleaning and disinfecting affected areas, and preventing future mold by fixing moisture problems.

Mold remediation is cleaning and removing mold growth from spaces, stopping moisture, cleaning affected surfaces, repairing leaks, and preventing future growth to keep indoor air safe.

Outdoor plumbing system repair fixes problems in outdoor water lines, sprinklers, faucets, and drainage. It involves locating leaks, replacing pipes or fittings, clearing clogs, and restoring proper water flow and drainage to protect yards and irrigation systems.

Plumber near me is a local plumbing service that you can find quickly when you have plumbing problems. It involves finding a nearby licensed plumber who can diagnose leaks, fix pipes, unclog drains, install fixtures, and provide emergency repairs at your location.

Plumbing is fixing and installing pipes, fixtures, and appliances that carry water and waste in homes or buildings. It involves repairing leaks, unclogging drains, installing or repairing sinks, toilets, showers, water heaters, and maintaining proper water pressure and drainage.

Plumbing leak detection is a service that finds hidden water leaks in your pipes using specialized tools and methods, then locates the source, measures the issue, and helps prevent damage by guiding repairs and prevention steps.

Plumbing leak repair is fixing water leaks in pipes, fixtures, or fittings. It involves finding the leak, shutting off water, repairing or replacing damaged parts, testing for leaks, and restoring normal water flow and pressure in the system.

Plumbing pipe repair fixes leaks, holes, or damage in water or sewage pipes. It involves locating the problem, removing damaged sections, and replacing or patching pipes, plus testing to ensure proper flow and no further leaks.

Pool plumbing repair fixes leaks, clogs, and broken pipes in the pool’s water circulation system, including drains, return lines, filters, and pumps, to restore proper flow and filtration, often by inspecting, replacing parts, and resealing connections.

Pressure Regulators manage and stabilize the flow and pressure of gases or liquids in a system, ensuring safe, steady operation by reducing high pressure to a controlled, desired level and maintaining it as conditions vary.

Preventive Maintenance is proactive care for equipment to prevent failures. It involves regular inspections, cleaning, lubrication, part replacements, and tests on a schedule to keep machines reliable and extend their life.

Repair Work is a service that fixes damaged items or systems, restoring them to proper working condition. It involves diagnosing the problem, replacing or repairing parts, testing functionality, and ensuring safety and reliability.

Root Intrusion is a security service that detects and blocks unauthorized access by gaining root or admin control. It involves monitoring systems, alerting on suspicious activity, and applying measures to prevent privilege escalation and protect critical assets.

Routine Maintenance is regular checks and small repairs to keep equipment or systems working smoothly, prevent breakdowns, and extend lifespan. It involves scheduled inspections, basic cleaning, part replacements, software updates, and documenting results.

Service Calls are scheduled visits where technicians travel to a customer's location to diagnose, repair, or install equipment, document work, and provide updates or recommendations for ongoing support.

Sewage cleanup is removing and cleaning up wastewater spills, sewage, and contaminated materials to prevent health risks. It involves safety gear, containment, pumping out liquids, cleaning and disinfecting surfaces, and proper disposal of waste and residues.

A sewer camera inspection uses a small waterproof camera on a flexible rod to inspect underground pipes. A technician feeds the camera through the sewer line to look for cracks, blockages, and root intrusion, then provides a report and repair recommendations.

Sewer cleaning is the process of clearing blockages and buildup from underground pipes that carry wastewater. It involves inspecting, flushing with water or air, removing debris, and ensuring free flow to prevent backups and odors.

Sewer repair is fixing broken or blocked sewer pipes that carry wastewater from homes and businesses. It involves locating the fault, clearing blockages, replacing damaged pipes or joints, and testing the system to ensure proper drainage and no leaks.

Shower installation is fitting a new shower unit in a bathroom, including attaching plumbing, mounting panels or tiles, installing a tray and door, and testing for leaks to ensure a safe, functional shower space.

Shower repair is fixing leaks, clogs, or broken parts in a shower. It involves diagnosing issues, replacing faulty valves, seals, or cartridges, repairing or replacing pipes, repairing drains, and ensuring proper water flow and pressure for safe, reliable operation.

Showers & Tubs is a service for installing, replacing, or repairing showers and bathtubs, including enclosures, fixtures, and related plumbing, to make baths functional and comfortable.

Slab Leaks detect and fix leaks that occur under concrete slabs in homes or buildings, usually from damaged water or sewer lines. The service involves diagnosing the leak, locating it beneath the slab, and repairing or replacing the pipe to stop water loss and prevent damage.

Slow Kitchen Drains is a home service that investigates and fixes slow-flowing sinks, typically by clearing clogs, inspecting pipes, and ensuring proper drainage to prevent backups and odors.

Sump pump installation is adding a pump in a basement or low area to move water away from foundations. It involves choosing a pump, installing a basin, connecting discharge pipes, and testing the system to prevent flooding.

Sump pump repair fixes a failed submersible or pedestal pump that moves water away from basements or crawl spaces. It involves diagnosing wiring, switch, float, motor, and check valves, replacing worn parts, testing operation, and ensuring proper drainage and power safety.

Tankless Water is a service that provides hot water on demand without a storage tank, using a high-efficiency heater that heats water as you need it, saving energy and space while delivering continuous hot water for showers, faucets, and appliances.

Toilet installation is the process of placing a new toilet in a bathroom, connecting it to water supply and drainage, securing it to the floor, sealing to prevent leaks, and testing for proper flush and function.

Toilet repair is fixing problems with a toilet, such as leaks, running constantly, clogs, weak flushes, or loose parts. It involves inspecting components, replacing faulty flappers, seals, fill valves, or toilets themselves, and ensuring safe, reliable operation.

Trenchless Replacement is a pipe repair method that fixes sewer or water lines without digging trenches. It uses techniques like pipe bursting or relining to replace or restore damaged pipes from the inside, minimizing surface disruption and restoration work.

Underground Boring is a service that uses a drill to create precise, hidden tunnels or holes underground for utilities, cables, or pathways, minimizing ground disruption and surface impacts while installing infrastructure safely and efficiently.

Water Filtration is a service that cleans tap water by passing it through filters to remove dirt, chemicals, and minerals, improving taste and safety. It involves system installation, maintenance, and periodic filter changes to ensure clear, clean water.

Water Supply is the service of providing clean, safe drinking water to homes and businesses, including sourcing, treating, storing, and delivering water through pipes, ensuring reliable pressure and basic maintenance of the water system.

Water damage-related cleanup & repair is a service that removes excess water, dries and sanitizes affected areas, and restores your home or business, fixing structural damage, repairing floors, walls, and ceilings, and preventing mold growth.

Water damage-related mold removal is the process of inspecting, containing, and safely removing mold that grows after water damage, drying the area, treating it to prevent return, and restoring or repairing affected surfaces to prevent future mold growth.

Water heater installation is the process of placing a new water heater in a home, connecting it to electrical or gas power, and plumbing lines, then testing for safe operation and proper hot water delivery.

Water heater repair is fixing your home’s hot-water boiler or tank so it heats water properly again. It involves diagnosing issues, replacing faulty parts, coils, thermostats, or valves, and testing safety and performance to ensure reliable hot water delivery.

Water removal is the process of extracting unwanted water from a space or material, such as floods, leaks, or spills. It involves pumping or sucking out water, drying surfaces, and measuring moisture levels to prevent damage and mold.

Water tank installation is the process of placing and connecting a water tank to your plumbing system. It involves choosing the right tank, mounting it securely, fitting in pipes and fittings, testing for leaks, and ensuring proper water pressure and safety.

Water tank repair is fixing leaks, cracks, or corrosion in a water storage tank so it safely holds and delivers clean water. It involves inspecting the tank, replacing damaged parts, resealing joints, repairing seams, and testing for leaks and proper flow.